What is the price and structure of the water inlet valve of the toilet?

The water inlet valve of the toilet is the key to the smooth operation of the toilet, which has a great influence on the o

What is the price and structure of the water inlet valve of the toilet?

The water inlet valve of the toilet is the key to the smooth operation of the toilet, which has a great influence on the overall use experience of the toilet. The structural principle of the toilet inlet valve is actually very simple, and there is basically no difference between different types of toilet inlet valves. The following small series will introduce the structure of the toilet inlet valve, the solution of the toilet inlet valve and the price of the toilet inlet valve.

The price of the toilet inlet valve

The price of toilet inlet valve in the market ranges from 7.5 yuan to 5 1 yuan. (Price source network, for reference only. )

Structure of water inlet valve of toilet bowl

There is a floating ball in every automatic flushing toilet. With the rise of the toilet water level, the buoyancy generated by the floating ball is increasing. When the water level rises to a predetermined value, the buoyancy generated by the floating ball will be transferred to the switch through the seesaw structure. When the switch is closed, the water inlet valve will not feed water. When the water is discharged, the button or wrench will pull the plug and pull it out automatically. After the water is discharged, the plug automatically returns under the action of the spring and enters the next round of water injection cycle.

Solution to overflow of water inlet valve of toilet bowl

1, close the inlet angle valve; Take out the water stop at the falling part and check whether it is deformed, aged or adhered by foreign objects; Clean or replace the water stop.

2. Close the inlet angle valve; Remove the broken special-shaped nut with a cross screwdriver; Replace the new special-shaped nut and tighten it; (When the overflow pipe is put into the ceramic installation port, pay attention to the smoothness. Do not tighten when shaking)

3. Close the inlet angle valve; Drain the water in the water tank below the water outlet; After adding dark solution to the residual water, observe whether the flushing port leaks. If yes, confirm that the porcelain body is cracked; No, then slowly open triangle valve. Accordingly, put the water above the water outlet and the water stop cover, and check whether there is water leakage when entering the water. When the water is placed horizontally with the lip surface of the body, if the lip surface comes out, it is confirmed that the body has cracks;

4. Regular cleaning: Regular cleaning of the water inlet valve can also reduce the occurrence of excessive water: remove the water inlet pipe of the water tank from the left side of the bottom of the toilet, and then remove the plastic nut at the bottom of the water inlet valve. If there is a strainer, please take it off, too. Then you can take the water inlet valve out of the water tank. Remove the water supply pipe of the water inlet valve (generally at the top, there is a plastic hose connected with the overflow pipe of the drain valve), pick up the plastic cover, loosen the connecting rod of Shui Piao, then twist it up and down in the opposite direction, take out the leather pad at the thimble inside, clean it and reinstall it.

What is the structure of the toilet water inlet valve? What should I do if the toilet water inlet valve overflows? These small series have been introduced in detail. The water inlet valve of the toilet is generally placed in the water tank of the toilet. When there is a problem with the water inlet valve of the toilet, you can solve the problem that the toilet cannot be used by replacing the water inlet valve.