How to Install and Design Smart Home

1. Circuit design before decoration: all lighting lines adopt neutral live wire; The circuit has been laid, or installed after decoration, and a single fire switch can be used, regardless of the zero line.

2. The dimmer switch must be equipped with incandescent lamp or halogen light source; If a single-fire switch is used, the power of each channel should be more than 5 watts, and the old up-conversion lamp can't be used, otherwise the switch can't be controlled or flicker, so zero-fire switch is not considered.

3. 12V power supply products are converted into 220V by power adapter (i.e. transformer).

4.4 DVR-based cameras must be equipped with 12V power cord video cable, and network cloud cameras without DVR-based cameras only need to be equipped with 12V power cord. For the sake of safety, network cables must be added to facilitate clear data transmission. If the cloud camera is hung from the ceiling, it is necessary to reserve power at the hanging position.

5. Electric curtains need power supply. It needs to be laid near one end of the curtain when decorating. If you need a curtain controller, you need to reserve 86 boxes with a certain height for easy operation, and the power supply needs to be laid in 86 boxes. At the same time, three wires are led from 86 boxes to the curtain motor, which needs to be buried in the wall.

6. Doors and bedrooms are designed with scene switches, and 86 boxes and power cords are reserved; If it is a modified design after decoration, you can use the custom scene switch of the battery, and you don't need to reserve power.

7. If there are high-power appliances in the bathroom, please control them separately, such as Yuba. Some need to be equipped with two yuba, which is high in power and needs to be controlled by a separate circuit or controlled by high-power light.

8.86 Precautions for the installation of boxes: Since the back of the smart home switch panel is slightly larger than the traditional one, do not expose too much when arranging the threading pipe, and leave a large space in the box. If there are many wires, you can bury 86 boxes deeper.

9. Such as window opener, manipulator, water spraying system, background music, etc. When installing, it is necessary to reserve power supply at the nearest location.