Gigabyte motherboard, how to set the U disk as the first startup item? Method for set computer startup project

Many good friends' computers are using Gigabit motherboards, and there will be some problems when the system on the computer is used for a long time. If you want to reinstall the system with a USB flash drive, everyone wants to know how a computer with a Gigabit motherboard can enter the BIOS to set up a USB flash drive. Chief Executive Officer of the system, I will make an example tutorial on setting up a USB flash drive for Gigabyte motherboard as the first startup item, and follow the process.

Example process of setting U disk as the first startup item on Gigabit motherboard

1. After the computer is turned on, Gigabyte motherboard logo immediately presses the Del shortcut key to enter the BIOS interface, as shown in the following figure:

2. Find and select Simplified Chinese, find Simplified Chinese below, move the direction key to the top and press Enter, then select Simplified Chinese.

3. Go to the "BIOS function" interface, search for "BBS ownership of computer hard disk drive equipment" with the down arrow key, and press enter to enter.

4. Enter the key of "startup ownership # 1" option to see your startup options. You can select "KingstonDatatraveler 3.0" and press Enter. You use Kingston's USB flash drive, and the others must depend on the brand choice of USB flash drive.

5. Press ESC to return, select "Start Ownership # 1" and press Enter to confirm.

6. After selection, press F 10 to save and exit. When the window pops up, click "Yes", which is the setting to directly enter the U disk PE system.

The above is an example tutorial of Gigabyte motherboard setting USB flash drive as the first startup item. I look forward to helping everyone. The system president gives examples of various related reloading systems, and warmly welcomes friends to collect them.