Illustration how to tie fishing rod line

The schematic diagram of fishing rod line binding is as follows:

First, the valve core connection method:

1. Tie the head of the soft belt to the pole tip with a knot and fold it into a semi-circular arc. Take a section of valve core and cover it with soft tape.

2. Thread the fishing line through the soft band ring and tie a knot. Take back the valve core from the soft belt when taking the wire.

Second, the connection method of movable coupling:

The connection mode of movable circlip is very simple and firm, which is very suitable. First, make a pimple on the soft belt. Tie the fishing line in a circle at the top. Fold the ring pair into a double ring. Then overlap the two rings together. Thread the soft belt through the ring. Tighten the steel wire so that the ring is tightly covered on the soft belt. When taking the thread, just loosen the ring and pull the soft belt out of the ring.

Third, the rubber band connection method:

Put the rubber band on the pole. As for the position of the casing on the rod body, it can be flexibly grasped according to the length of the line (referring to the line before the tip of the rod). If you want to make the line longer, put the rubber band in the first few paragraphs of the pole; If you want to make the line shorter, put it behind the pole. Wind it several times to fix the rod so that it will not move forward.

First, put a valve core or rubber cap on the fishing line, then tie a connecting ring at the end of the line and connect it with a rubber band with a connecting ring.

Fishing rod was originally a tool for human beings to make a living by fishing. Now it is usually used for fishing leisure in outdoor sports, and also for some sports or outdoor competitions in fishing competitions.