What materials are used for the base and wall of the crystal lamp?

(* _ _ *) The following answers are reproduced:

The most common chassis materials of crystal lamps are: wood, iron and stainless steel.

Wooden pallet is the worst material. Followed by iron plate, preferably stainless steel. But there is also a thickness in the middle.

Wooden pallet is relatively thick, and it is pressed by wood ash machine, so it is not easy to sell in high humidity cities, otherwise there will be a lot of after-sales things. Therefore, when choosing a product, you can't look at it with the naked eye. The big one is good, and the small one is bad. The chassis made of iron and stainless steel depends on its thickness. The thicker the thickness, the better the quality and the greater the endurance.

There are three kinds of iron chassis: painted iron plate, painted iron plate and electroplated iron plate. Baked iron plate, with general technology, is commonly used in low-voltage lamps, flat lamps and modern lamps, which is widely used and has a large number. Its surface is also covered with a layer of stainless steel, which is only used to increase the endurance of the chassis; Baked iron plates are generally used in some high-tech modern crystal lamps, with small application area, but high cost, and particularly strict requirements for baking paint technology; Electroplated iron plates are generally used for traditional crystal lamps, larger crystal lamps and non-standard crystal lamps. It is also widely used, but after the iron plate is formed, it needs polishing and electroplating. There are many colors of electroplating, the most common ones are gold and chromium plating.

The chassis is made of stainless steel, and the most common stainless steel materials are divided into two types: mirror stainless steel and titanium plate stainless steel. Another special requirement is black titanium stainless steel. Usage: the first one, as mentioned above, is combined with iron plate and durable, and stainless steel plays a decorative role. The second is the crystal lamps used in hotels, villas and clubs. Any pattern can be carved by laser. Most of the plates under one meter five are whole plates, and those above one meter five need to be spliced. At this time, there are strict requirements for the thickness of stainless steel. Commonly used materials are: 1.2 and 1.5!

The lamp wall is made of metal and glass.

Good wishes!