Method of pulling drawers

Pull out the lower slide rail of the drawer as follows.

First, determine the position of the slide rail under the drawer. There is a bolt on the side of the conventional slide rail to fix the drawer so that it will not exceed its original position. Just slowly remove the bolt, remove the fixing device, open the drawer and take it out, and finally remove the slide rail.

How to install the furniture drawer guide rail;

First of all, we should understand the structure of the steel ball moving pulley slide rail, which is divided into three parts: the theme movable rail, the middle rail and the fixed rail, among which the theme movable cabinet is the inner rail; The fixed guide rail is an outer guide rail.

Before installing the slide rail, you must also remove the internal slide rail from the slide rail of the theme movable cabinet and install it on both sides of the chest of drawers. During disassembly and assembly, everyone should be careful not to damage the slide rail. Although the disassembly method is simple, we must pay attention to it.

Lower the outer cabinet and the vertical slide rail respectively on both sides of the chest of drawers, and then install the inner slide rail on the baffle of the chest of drawers. Screw holes will be embedded in the chest of drawers, and you can find the matching screw holes.

After all the screws are fixed, the chest of drawers can be sent into the shell. When installing, everyone should pay attention to the spring leaf in the inner rail, and then gradually put the parallel surface of the drawer into the bottom of the shell to keep the two sides balanced. If the drawer is pulled out, the drawer slides down immediately, indicating that a part of the spring leaf is not stuck.