How to operate the car when turning?

When the car turns, the operation method is as follows:

1, press the clutch and brake, and push the gear lever to neutral;

2. Continue to press the clutch and brake, turn the key to the right to the first gear, and let the car self-check;

3. After the vehicle self-inspection is completed, continue to turn the key to the right to ignite (at this time, you still have to step on the clutch);

4. After the engine is started, because the clutch has been stepped on before, directly shift to the first gear;

5. Slowly release the clutch and brake, and slightly release the brake (using semi-linkage) when the car shakes obviously.

Matters needing attention when turning a car

1. Turn on the turn signal: Turn on the turn signal when turning, otherwise the driver behind the car is likely to make mistakes in judgment and cause unnecessary casualties.

2. Don't turn the steering wheel too fast: when the car turns, the speed should be slow, and the steering wheel should not turn too fast, so as not to cause the car to sideslip due to excessive centrifugal force.

3. Don't put in neutral when entering the corner: In neutral state, the engine can't restrain the operation of the wheels, and the car runs under inertia. At this time, all braking and steering operations are greatly reduced, which is likely to cause safety hazards.

4. Turn left and make a big turn as far as possible: In order to avoid other dangers such as obstacles or collisions, you should try to turn farther away.