Will the lifting electromagnetic sucker be directly reset?

Yes, the lifting electromagnetic sucker is widely used now, and there are many skills to pay attention to in use. Hunan Qian Hao Electromechanical Lifting Machinery Factory has unique experience in the application of lifting electromagnetic sucker. Next, please ask Mr. Bian Xiao from Qian Hao Electromechanical Lifting Machinery Factory in Hunan Province to introduce the use skills of lifting electromagnetic sucker in detail.

1. After the power is turned off, in order to remove the remanence, the switch should return to the demagnetization position repeatedly when removing the workpiece.

2. When the workpiece is clamped, in order to clamp firmly and give full play to the magnetic force, the number of magnetic insulation layers covering the positioning surface should be as much as possible. Among them, there should be stops higher than the height of the workpiece around the higher workpiece, and the smaller and thinner workpiece should be placed in the middle of the magnetic insulation layer.

3. When the workpiece is difficult to take out due to remanence and high adhesion of smooth surface, care should be taken not to forcibly take out the workpiece. According to the shape of the workpiece, loosen the workpiece with a wooden stick, a copper stick or a wrench before taking it off.

4. In order to keep the surface smooth, the electromagnetic sucker can be polished when there are many scratches and pits due to long-term use. When grinding, the electromagnetic sucker should be electrified and in working condition, the grinding amount should be small, and the cooling should be sufficient. During this period, the electromagnetic sucker should be electrified and in working condition.

5. After the work, in order to prevent the accuracy from decreasing, the electromagnetic sucker table should be wiped clean, and antirust oil should be coated when it is not used for a long time.

6. The strong magnetic jack should be placed on the steel plate to install the handle, because in the case of magnetization, the handle runs freely, otherwise it is difficult to turn.

7. Before using the strong magnetic crane, you must read the instructions carefully. Overloading is strictly prohibited and must be used within the rated lifting range.