Traditional Culture Encyclopedia - Traditional culture - How to install a small pot cover TV receiver in rural areas

How to install a small pot cover TV receiver in rural areas

The general connection method of the small pot cover TV receiver in rural areas:

Install the small pot cover of the satellite TV receiver on the balcony or on the roof, generally need to be high, open and free of obstacles in order to make the received signals stronger and more stable; Introduce the signal cable from the small pot cover of the satellite TV receiver into the satellite receiver's signal input port; then use one end of the AV connecting cable to plug into the receiver's AV output port; the other end to plug into the TV set's AV input port; start the TV set and the satellite receiver device. Then use one end of the AV connecting cable to plug into the AV output port of the receiver; the other end is plugged into the AV input port of the TV set; start the TV set and the satellite receiving device.

Use the remote control of the TV to operate, press the "Source" button, select "Video (AV) mode" in the pop-up source menu, the interface of the satellite receiver can be displayed; use the remote control of the satellite receiver to search for TV programs and channels. Use the remote control of the satellite receiver to search for TV programs and channels, and you can start watching TV programs after you finish the search.

Expanded Information:

Installation of a Micro SD card p>Installation of ultra-small satellite receiver tray, let us first recognize the role of several screws: in addition to the high-frequency head into a line of three large flat head screws, two base and connecting rod screws, there is a high-frequency head and bracket fixing screws, the other are used in the hexagonal screws, the use of two beams to fix the tray for the four short hexagonal screws.

The receiver head to the southwest direction, which is very important, because this is the location of the satellite TV transmission signal, adjust the adjusting screws until the tray vertical degree of about 70 degrees or so, and placed flat on the roof or on the ground can be, followed by the layout of the cable TV connection cable, this step is the whole process of the most labor-intensive things.

Placed after connecting the satellite receiver HF head and satellite receiver of the two cable TV jacks, and then the decoder and the TV video, audio signal cable connection, well, now we can power up the TV and satellite receiver.

For China Star 9 target is absolutely southwest of the direction of a certain angle, adjust the position must be slow, to be on the screen signal strength and quality of green can be. Of course, the signal quality is the higher the better, if you have not received a valid signal, you first of all to the horizontal position of the TV screen in the strongest signal strength of the position and fixed do not move, then you can adjust the connecting rod on the adjust trkdilhf section screws to change the angle of inclination of the pallet until the quality of the signal to meet the required indicators can be.

Reference:

Satellite pot ? Baidu Encyclopedia