How to fly a kite?

Kite making tools: paste, paper cutter Kite making materials: bamboo stick, gauze paper, horse drawing paper. Characteristics of square kite: (1) This kind of square kite is the most widely used and common one at present. (2) The skeleton of a kite is very simple, with only two pieces. (3) Although the method is simple, the appearance changes a lot, and a lot of things can be made with a little effort. Practice: 1. First soak the bamboo stick in water to soften it, then break it with a knife, about one-third the thickness, and then trim half the shape, because later, you have to stick the bamboo stick on the horse drawing paper. If it is too thick, the bamboo stick will tear the paper, and at the same time. Cut the repaired bamboo stick into two pieces with appropriate length, about 16 inch and 23 inch. Next, cut the horse drawing paper into a square, about 24 inches long. Horse drawing paper is a kind of rough paper, which is most suitable for making kites. 2. At this time, you can stick the bamboo stick on the paper, but remember to stick the long bamboo stick on one third of the short side with gauze paper, and then bend it slowly until the two ends of the long bamboo stick touch the diagonal of the paper. 3. In the last step, stick the tail of the kite under the kite, and after the angle between the line and the kite is better, you can take off. The kite's tail is the main tool to keep the kite balanced. When the kite flies against the wind, if one side is heavy, the kite will tilt to this side, preferably with a long tail, because the longer the tail, the greater the weight of the kite's head will rise, which will make the whole body suffer from the wind and balance the tilted side. 5. The silk thread of the kite can be tied to the kite with coils such as cowhide thread, cotton thread and glass thread, and the coils can be divided into circular coils and diagonal coils.