How to Compile Eel Cage

1. Zhujiang beer bottle x 1 (other brands can do it, haha).

2. The small conductor is about1m..

3. Braided tape

Tear the woven tape into a width of 0.8 cm and a length of 50 cm for later use, and cut the tip with scissors to prepare 15 pieces. The more pieces, the greater the strength. You can only use odd numbers, even numbers are not good. Prepare 10 pieces, about 1 m long and 0.2 cm wide for use.

Start knitting according to the following steps:

15 0.8cm braided belt is lined up with the tip facing upwards. Tie the 15 braided belt with two iron wires starting from 8cm below the tip of the first braided belt, with the distance between each wire not exceeding 3mm, and tie it in a circle at the beer bottle (is it just a circle? ). At this time, the beer bottle mouth is facing down, and the braided belt that has just been bent into a circle is tightly held by both hands. That is, take s). The more you weave, the bigger the caliber (this is the role of beer bottles). When knitting to 5cm, you should bend the 15 piece outward, then tie it in a circle at the mouth of the bottle (a bit like an eggbeater), and then knit all the way along the bend. When you knit to 10cm, you can use the whole ribbon. At this time, I don't think you need a beer bottle. It can be woven to a total length of 20.