What kind of oil press is used by Lu Hua, a large oil press manufacturer?

Hydraulic oil press is a traditional small oil press, and the production process is intermittent. This process is characterized by low technical requirements, high oil yield and good crude oil quality, but it is labor intensive. Hydraulic oil press is suitable for small-capacity and small-workshop production, with a daily capacity of 1 ton.

2. Screw oil press

Automatic screw oil press is a kind of oil press that can work continuously. The technical features are: low technical requirements for operation, high oil yield, poor quality of crude oil and lower labor intensity than hydraulic oil press. The automatic screw oil press is suitable for small workshops with a small processing capacity, with a daily processing capacity of 2-8 tons/set.

3. Large and medium-sized screw oil press

Screw oil press is suitable for large and medium-sized, continuous and large-capacity oil plants. The technical features are: continuous production, low labor intensity and high oil yield.

The equipment of a single oil press is around several thousand yuan. If it is an oil press production line, it will cost tens of thousands to hundreds of thousands of yuan. If you want to be a small oil processing plant, you can use a small oil press production line, so the production efficiency and automation will be higher. However, if you are a self-employed person in the workshop, the output is generally not high, and you can choose a smaller fully automatic oil press.