Which adherence policy algorithm is used in traditional Ethernet?

Ethernet uses the carrier frame listen multiple access (csma/cd) mechanism with conflict detection.

Nodes in an Ethernet network can all see all the information sent in the network, therefore, we say that Ethernet is a broadcast network.

Ethernet works as follows:

When a host in an Ethernet network wants to transmit data, it does so as follows:

1. The frame listens to the channel to see if there is a signal being transmitted. If there is, it indicates that the channel is busy, so it continues to frame listen until the channel is free.

2, if there is no frame to hear any signal, the transmission of data

3, continue to frame listen while transmitting, such as the discovery of a conflict, then the implementation of the retreat algorithm, randomly waiting for a period of time, re-execution of step 1 (when a conflict occurs, the computer involved in the conflict will be sent to return to the frame to listen to the state of the channel.

Note: Each computer is allowed to send only one packet at a time, a congestion sequence to warn all nodes)

4. If no conflict is found then the transmission is successful, the computer all the computers before attempting to send the data again, you must wait for 9.6 microseconds after the most recent transmission (running at 10mbps).