How to stick the glass door anti-collision strip

How to stick the glass door anti-collision strip

How to stick the glass door anti-collision strip? Because of lighting or aesthetic factors, glass doors will be installed in some places, but in order to prevent the whole glass door from falling and increase the stability of the glass door, glass door anti-collision strips will be attached to the glass door. Let me show you how to stick the glass door anti-collision strip.

How to attach the glass door bumper 1?

The role of glass door protection stickers:

The glass door bumper has two functions. One is for the beauty of the glass door, which is transparent and contains no impurities. If some anti-collision strips are decorated on the glass door, it will increase the aesthetics of the glass door. The second is to identify the glass door anti-collision strip, which plays a role of reminding, avoiding some people from safety accidents and preventing danger. If you are interested in designing glass door anti-collision strips, you can not only give others a refreshing feeling, but also enhance the taste of your home, decorating both the glass door and your home. Does it feel useful?

How to stick the glass door anti-collision strip:

1 First of all, we need to clean the quilt cover to remove impurities such as oil and dust.

2. Dry the veneer area before further pasting. Remember, be sure to dry it, otherwise it will be stuck, and it will easily slide down or have bubbles.

3. After measuring the service length, cut the corresponding length respectively. This must be measured well, because the view is more comfortable when looking at the neat protective stickers.

4. The next step is to tear off the back glue of the protective tape, slowly prevent it from sticking together, and then stick the protective tape on the veneered glass. It's not just posted, there's another step to be done.

5. Later, the whole glass door anti-collision sticker was pressed firmly. This is the completion of all steps.

Glass door protection stickers look good, but it is important to be neat. Neat protective stickers make people feel very comfortable.

Glass door crash strips come in many colors. Perhaps in my opinion, white bumper may be commonly used, but not only white, but other colors may make you look different if decorated properly. Of course, most of them are translucent.

Glass door bumper 2 1 How to stick and how to use it:

(1) Clean the quilt cover to be protected and remove grease and dust from it.

(2) The veneer is dried and pasted.

(3) After measuring the service length, cut the corresponding length respectively.

(4) Tear off the adhesive and stick the protective strip on the veneer.

(5) Compacting the whole anti-collision strip.

2. The anti-collision strips for glass doors are mainly H-shaped, F-shaped, U-shaped and corner-shaped. Each model has specifications of 6, 8, 10 and 12(MM), which are suitable for glass thickness of 6MM, 8MM, 10MM and 12MM respectively, and the price is cheap.

What is the size of the glass door bumper?

Single person, 8-10cm; 3 strips, 2-3 cm, at the same interval. Actually, it's good to look beautiful

The size of the glass door bumper is nothing more than length, width and height. The length of the glass door anti-collision strip is suggested to be the width of the glass door, and the height of the anti-collision strip is suggested to be about one meter from the ground, and the width can be thick or thin.

The glass door bumper has only two functions.

One is for the beauty of the glass door, which is transparent and contains no impurities. For example, some anti-collision strips are decorated on the glass door to increase the aesthetics of the glass door;

The second is identification. The glass door anti-collision strip plays a role in reminding people of safety accidents and dangers.