What is the name of the equipment for carving jadeite?

What is the name of the stick motor that the master holds when carving jade and jadeite?

Second, the gong machine is a tool that can be held by hand, which is as convenient as holding a pen, but the speed is the same. Third, the electronic machine, which is also hand-held, is also very convenient, and the rotating speed can be adjusted, which can polish the fine parts of jade. Third, Suzhou straddles the car.

Dental machines, dental machines are medical equipment borrowed by dentists. Its flexibility is the best of all models at present, so it is mainly used for detail processing, but it is of little value in heavy work.

The engraving machine is divided into high power and low power because of its engraving motor. When processing large jade, choose high power to meet the demand. For carving small handicrafts, it is more profitable to choose low-power motors. Pay attention to the adjustable speed range of the engraving head motor.

Towel: the first protection; Second, prevent jade from moving. Sponge: used to absorb water, depending on the degree of rubbing. Iron sand board: used for grinding bars. Desk lamp: It is to see the polishing details more clearly and carefully. Jade carving polishing method: Three common polishing methods are hanging grinding polishing.

This kind of small ceiling fan must be the kind of situation you said to start socks. If you repair its shaft, the ceiling fan will burn out immediately. This is a synchronous motor. If it starts slowly and turns slowly, it should be broken. Either the coil is burnt or the shaft is broken.

Emerald: the hard glass luster with reflective luster reveals a cold chill, so it is called cold water jade. Jade with different glossiness: the surface presents greasy luster with different strengths and weaknesses, and the luster is soft and moist, so people understand it as moist jade.

How to carve the jade ring and what kind of equipment is used?

1, the first carving tool: Tito Tuo is the name of an ancient tool, which refers to various circular carving tools used in rotation. It is mainly made of steel, so it is also called iron weight.

2. Lighting: Generally, large and powerful factories have this technology. Use special tools and materials to smooth the extra nicks and "sand holes" in the last carving process, so as to lay a good foundation for the next grinding process.

3. In ancient times, jade products were carved with stone benches. When carving as shown in the figure, step on it with your feet, and then put jade sand on the knife edge with your hands. This carving process is very slow, and it often takes several years to complete a work.

4. In ancient times, jadeite jade was cut with special lines: natural jade was irregular. At first, people used ropes. This inspiration may come from the friction fire at that time, rubbing jade repeatedly with a rope, and breaking the jade after heating.

5. It is an engraving technique that forms a depression on the surface of the engraving material, so that the characters or patterns are recessed below the hook edge and below the plane of the material. Relying on skillful and accurate techniques, the lines have ups and downs, setbacks and deep effects. Internal carving. Internal carving is a kind of jade carving technology that goes deep into the jade material and carves round carving and relief shape.

Can the fully automatic numerical control jade carving machine carve jade?

Generally speaking, the application of jade carving machine Jade carving machine can be seen everywhere in our life and production. Science and technology witness quality and lead the continuous progress of automation machinery industry.

The tools for carving jadeite mainly include carving machine, electric drill, polishing machine, wax pot and so on. 2. The basic process is to cut jadeite into embryo, square or circle with a chainsaw. The sculptor draws lines according to the needs of jade carving, and then puts them into the carving machine.

Yes, your jade carving machine can carve silver, gold and copper.

Polishing powder: Polishing powder is specially used for polishing jade and jadeite products. The commonly used polishing powders include iron oxide, oxide scale, alumina and natural diamond powder. Use different polishing powder according to the actual situation. CNC engraving machine: Generally, there are electric jade engraving machines on the market.

Compared with the numerical control jade carving machine, the computer jade carving machine is more complicated in operation and occupies a larger area, so the processing needs a lot of space. The CNC jade carving machine is controlled by a handle, and the functions of the computer on the jade carving machine are all on the handle, which is equivalent to optimizing the functions that the jade carving machine needs to control on the computer on a handle.

Tailor-made design, design a perfect theme for jade, suitable design makes a piece of material reach the most beautiful state, because the material. After the design is completed, you can start carving, cut into large sizes and polish the basic shape of the carving theme with a jade carving machine.

Jade is carved with what it is carved with.

1. Relief is one of the methods commonly used in jade carving. This is a semi-three-dimensional sculpture exhibition. Carve a raised pattern or shape on the surface of jade material to show the three-dimensional sense and space sense of the pattern. Usually just compress the thickness and keep the original ratio of length to width to express the artistic image.

2. relief. The spatial structure of the relief can be a three-dimensional shape or a plane shape; It can be attached to the carrier or exist relatively independently. The difference between relief and round carving lies in its relative flatness and three-dimensional sense.

3. The tools for carving jadeite mainly include engraving machine, electric drill, polishing machine and wax plate. 2. The basic process is to cut jadeite into embryo, square or circle with a chainsaw. The sculptor draws lines according to the needs of jade carving, and then puts them into the carving machine.

4. Through carving pays attention to hollowing out, hollowing out and then hollowing out, deliberately removing the imaginary part outside the image, so that the utensils form a transparent and smart sense of space. Through carving technology makes the carved image clear, and the combination with jade is more exquisite and transparent.