Roller shutter door what material is good

1, aluminum alloy rolling door: this door is the most common is also the most traditional, appearance and environmental performance advantages are relatively large, but the bad point is that the noise is too big.

2, color steel plate rolling door: color steel plate has a variety of colors, but also according to different requirements to choose the door, and secondly can increase the light.

3, grid roller shutter door: grid roller shutter door not only air and light transmission are particularly good, but also has a good anti-theft effect, is a kind of modern sense of the roller shutter door.

4, stainless steel rolling door: stainless steel rolling door surface is very glossy, not only wear-resistant and more scratch-resistant, clean up is also very convenient.

Rolling gate use precautions

Rolling gate motor continuous rolling time shall not exceed 5-10 minutes, because the motor continuous running time exceeds the specified time the motor is easy to heat, if the motor temperature exceeds 120 ℃, the thermal protector in the machine cuts off the power by itself, to be the temperature down to 70 ℃ (about 8 minutes) to protect the device can be automatically reset.

When opening and closing the electric roller shutter, the operator shall not leave the site, the motor is strictly prohibited to stand or walk under the door during commissioning or operation to ensure safety. When opening and closing the shutter, pay attention to maintain the effective distance between the shutter and the ground and the curtain box to prevent the phenomenon of the shutter and track jamming and the phenomenon of the shutter rolled into the curtain box more than 10CM from the ground, 20CM from the curtain box).

Reference to the above? Baidu Encyclopedia-Rolling Gate