Method of making door frames with wooden strips

Making door core: Woodworking doors are made of Chinese fir or white pine as the main material, and are made into solid door cores. The moisture content of the core material of the drying back door is strictly controlled, and it is not easy to deform. Making convex and concave shapes: Woodworking doors are made of high-quality MDF, and the door panels with three-dimensional shapes are made by sawing, planing and milling.

Install the balance layer: medium density board, which is integrated with the main material of the door core after being pressurized at high temperature by a hot press, which not only ensures the overall stability and flatness of the woodworking door, but also solves the problems of cracking and deformation.

Wooden door installation sequence

1. The first step in installing a wooden door is to assemble the door cover. Let's find out the door cover and riser first, and match the joints according to the number on the back. Note that the interfaces are on the same plane.

2. The second step of installing the wooden door is to install the door cover. Everyone put the firmly assembled door cover into the doorway, roughly fix the door cover with small wooden strips, and check whether the door cover is vertical to the ground and whether the door cover vertical plate is bent. And wrap the iron sheets at both ends around the wall.

3. After the door cover is installed, you can start to install the door leaf. Open the hinge slot, and pay attention to the distance between the hinge slot and both ends of the door leaf should be one tenth of the height of the door leaf. After the door leaf is installed, you can install the door lock, door cover line and door suction.