Wall panel installation method

Wallboard construction should be made first for the large surface after the hole, from the wall column side joints to start installation. Clean up the construction surface dust, according to the design requirements in the wall floor and ceiling pop-up partition board position line, mark out the door and window openings and pipeline direction and reserved holes, pop-up assembly line, and check the ground level, depression greater than 40mm should be smoothed with fine stone concrete, and its strength reaches 2.5MPa before construction. The top and side edges of the wallboard adhesive surface coated with adhesive, adhesive thickness of not less than 5mm, scraping should be uniform. When you need to make up the board, scribe and cut according to the actual size of the row of boards, the vertical incision is closed and filled with cement mortar, and the splicing still needs to be coated with micro-adhesive.

Wallboard, as the name suggests, is a combination of wall and wood panels, is a kind of load-bearing structure of the house, not only that, the wallboard is also used to do the partition between the room and the room, is now the most commonly used in home improvement is also the most affordable structure.