What is the meaning of printing out of the film?

1, film output, this technology is a similar to the photographic exposure process, it is the first graphic through the RIP process into the dot matrix image, and then converted to dominate the laser signal, the use of the laser relative to the longitudinal and transverse movement of the film film sheet, the laser point to the film sheet corresponding position, so that the film sheet of the corresponding parts of the exposure, and then through the process of the developer's development of the fixation of the underexposed portion of the rinse Then, through the process of developing and fixing, the unexposed part is washed away, and a dot matrix image is formed on the film sheet.

2, in the film output, through the proofing, proofreading and other links, and finally the qualified film to the printing house, the printing house according to the specifications of the unit's equipment for tanning, collating and other processes, after printing products.

There are three ways to see the actual printing effect before printing:

One, out of the film before the better quality of color spray (cheap, but not too easy to see accurate);

Two, the number of prints available for digital printing a few test prints first to confirm that the film before the printing, only on the printing machine; the number of less direct digital printing and fast and cheap;

Three, out of film After letting the film company draft (with proofing presses first test print 6 finished), this is the most traditional practice, the price is not low, slow, but the effect is good.

Expanded:

Film output process summary

1, the production of manuscripts, the use of photolithography output system support, the more commonly used design and production software.

2, the text of the picture mode must be CMYK mode, accuracy of at least 300 × 300dpi / pixel / inch.

3, check whether the text in the manuscript is a four-color words, if so, must be changed to a single color 100% black.

4, if use pagemaker, viz, Founder's bookplate, Illustrator, must copy its link image file and the original file together.

5, photoshop files should be psd (not merged layer) of the file, in order to facilitate the modification.

6, fonts using commonly used fonts, such as Founder, Wendi. Do not use rare fonts. If you have used, available coreldraw and Illustrator will be converted to text curve (online) way to avoid the output center can not be output due to such fonts and the problem. If there is a complementary file, the complementary file must be copied together.

7, clearly inform the output center of the finished size of the printed matter, print volume, printing paper, etc., in order to facilitate the collocation and hanging.

8, such as two pages of the same content, only the black text part is different (common phenomenon), just output the first page of the CMYK four-color, as well as the second page of the K-color can be, to avoid waste. If there are only two colors (such as: red, black), and printing requirements are not high, just a color version of the same time in the output, do not need to be divided into two-color output. It can be handled when printing plates.

Baidu Encyclopedia-Film Output

Baidu Encyclopedia-Film