How to make a fishing net

Steps to make a fishing net are as follows:

Preparation materials: cardboard, braided rope, shuttle.

1, you can take a piece of cardboard to start, and wrap 32 turns of silk thread around it.

2. Take the loop off and hang it on the wall or a high place with the wire.

3. Hold the ruler board in your left hand and the shuttle in your right hand.

4. Tie the thread on the shuttle to one of the loops on the loop, and loop the thread from the lower part of the ruler board to the top.

5. Thread the shuttle through the loop and back out again, and tie a knot with the silk thread on the top of the ruler board to complete the weaving of a mesh.

6, continue to continue to weave from left to right, layer by layer to get a fishing net.

Methods of preparing fishing nets

One, knotting method

is the traditional method of making fishing nets, fishing nets are made of warp threads and weft threads in the shuttle set of knots, the size of the knots is four times the diameter of the netting rope, protruding from the plane of the netting. This type of net is called a knotted net. Knot in the starting net collision fish and boat side, both fish and make the net wear and tear, and because of the chemical fiber smooth and elastic, easy to cause knot slack, mesh uneven and other problems.

Second, twisting and flicking method

Two groups of yarn by the machine at the same time twisting and flicking, in the intersection of each other through the heart of the intersection into a net, this net is called twisting and flicking knotless net. Because of the net knots at the yarn is not bent, the net flat, reducing friction, but the twisting machine efficiency is low, the preparation process is complicated, the transverse mesh is limited, only suitable for weaving a larger mesh net.

Three, warp knitting method

Usually equipped with 4 to 8 comb Raschel warp knitting machine will be connected to the warp yarn into a circle into a net, said warp knitting knotless net. Due to the high speed of the warp knitting machine (600 rpm), the width of the knitted net is wide, and the number of cross mesh can be more than 800 mesh, and it is convenient to change the specifications, and the production efficiency is several times higher than that of the previous two methods.

Warp knitting knotless nets are flat, wear-resistant, lightweight, structurally stable, high knot strength, no deformation or loosening of the nets after breaking, and can be widely used in sea fishing, freshwater fishing and aquaculture, as well as a variety of other special purposes.