Traditional Culture Encyclopedia - Traditional culture - Manufacturing method of small wooden boat

Manufacturing method of small wooden boat

The method of making a small wooden boat is as follows:

Material preparation: wood, carving knife.

Production steps:

1. First, find a long wooden board with a length of about 10cm and a width of about 1.5cm as the bottom of the boat.

2. Then dig the long wooden block into a boat shape with a meat cleaver to make a feeling of the bottom of the boat.

3. Make a hole in the boat bottom made in front, and the size of the hole is determined by the boat bottom made by yourself. Use disposable chopsticks to make four pillars.

4. Put two disposable chopsticks in the hole. If you want to repair them, you can add some super glue.

5. Find some bamboo pieces and string them in a row to make a awning.

6. Such a small wooden boat is ready.

Interpretation:? Wooden boats refer to wooden boats, usually driven by paddles, paddles, etc. It not only refers to the ship with wood as the main material of hull structure, but also refers to the ship with wood as the main material and metal material only at the joint of plates.

Classification:

Its functions can be divided into: fishing boats, civilian ships, merchant ships, ferries, cruise ships, warships and so on.

According to its navigation waters, it can be divided into: river ships, sea ships, lake ships and so on.

According to its size, it can be divided into: wooden boat, raft, wooden boat, sailing boat, boat, warship, ark and so on.

Wood selection:

Selection of wood: natural aged Chinese fir should be selected for wooden nail boats, and skinless deep mountain wood in Hunan is generally selected. This kind of wood is of good material and strong toughness, and the ship made of it has great buoyancy, light load, sensitivity and durability.

Batch cutting:

Batch truncation: the size of the truncated batch depends on the hull structure. Take Zhangba ship as an example: the middle cabin is six feet, the hatch is four feet wide, the bottom width should be two feet five inches, and the height of the side wall should be one foot three inches; The thickness of large ships and small ships has certain agreement; Ships from Zhang Er to Zhangba usually use 10- 14 cm wood, and then break it in specific size for use.

Broken board:

Broken board: there was no chainsaw before, so I broke the board by hand. The thickness of the board is determined according to the size of the nail boat. Generally speaking, the thickness of a big ship is about three and a half centimeters, and that of a small boat is about two and a half centimeters.