Dismantling method of faucet of lazy washing machine

The faucet of the lazy washing machine is roughly the same as the traditional faucet, and consists of faucet body, water nozzle, nut and other parts. Dismantling the faucet of the lazy washing machine requires some basic knowledge and skills. The following is the removal method:

1. Close the water source: the water source valve needs to be closed before disassembly.

2. Dismantle the faucet spout: loosen the nut of the faucet spout with a wrench or pipe wrench and remove the faucet spout.

3. Dismantle the faucet body: loosen the nut of the faucet body with a wrench or pipe wrench and remove the faucet body.

4. Remove the filter screen: After removing the faucet body, you can see the filter screen in the faucet body, and remove it with a wrench.

5. Cleaning and replacement: after cleaning the filter screen, reinstall it, and rotate the faucet repeatedly to remove impurities in the faucet. If necessary, the sealing ring of the faucet can be replaced.

6. Installation: After disassembly, install the faucet body and water nozzle in turn, and tighten the nut with a wrench or pipe wrench. Open the water source valve and test whether the faucet is in normal use.

It should be noted that in the process of disassembly, it should be carried out in turn, and it is not necessary to forcibly disassemble or excessively pull, so as not to damage the faucet parts. When replacing the sealing ring of the faucet, we can make choices according to the actual situation, such as selecting materials with high temperature resistance and corrosion resistance to prolong the service life of the faucet.