How is the float connected to the fishing line?

Rubber pipes can be used to connect the fishing line with the float, and the specific steps are as follows:

1, insert fishing line with rubber tube;

2. Insert the float into the rubber tube to fix the float on the fishing line;

3. If you want to adjust the position of the float, you only need one hand to hold the line and the other hand to hold the rubber tube, so you can move along the line with the float.

In addition to the above methods, it can be solved by the following methods:

Wire sleeve connection method

First, the nylon braided thread with a length of about 20 cm is folded into double threads, which will form a thread sleeve. Then the thread sleeve passes through the circular hole or metal ring at the tail of the float, and then is dragged between the two thread sleeves, and a fast knot is tied near the thread end, and a double-ring slipknot is wound around the position of the float. Then, put the thread with the dead knot into this double loop slipknot, tighten and fix it.

The connection of seven-star drift

Thread the fishing line through several feathers or plastic balls, but the connection between them is loose and easy to slip. You can sharpen a small bamboo stick or stick, plug it in, and then cut off the protruding part, keeping a distance of 4 cm to 6 cm between each drift.