How appropriate is the frequency control of vibration friction welding 6 15e?

The noise during operation is less than 80 decibels.

(1) When assembling the welding die, the vibrator and expansion cone should not rotate more than 300 to avoid breaking the high-voltage line;

(2) The welding mold should be fixed without looseness;

③ Ultrasonic inspection shall be conducted before welding, and the amplitude shall not exceed the range specified by the machine;

(4) shell test should be adopted during debugging, and the products can be welded only after the ultrasonic wave is adjusted to a suitable range;

(5) when welding, be careful not to extend your hand or other objects to the welding part to prevent extrusion or damage to the welding die;

⑥ When welding, the human body should not press the vibrating die to avoid scalding. If there is any problem during operation, please press the red emergency stop button;

All landowners normal production, should wear earplugs to protect.