How to use a fishing rod?

The use of fishing rods can be learned at Little Yellow Fishing Rods

What kind of rod is a good rod? How to choose a better rod in the same category and price?

First, we introduce four concepts, namely:

1: The taper of the rod determines the tuning.

2:The thickness of the rod wall determines the strength.

3:The diameter of the rod determines the stiffness.

4:The difference in material has a great influence on the above 3 points.

Walking up is a very boring text, wiggle try to make it clear in the vernacular.

1:Tone: A rod that starts to bend when it hits a fish. This is what is usually referred to as: two-eighths, three-sevenths, etc. The manufacturer's more specialized names are: "Tone", "Tone", "Tone", and "Tone". The manufacturer's more professional name is: "the first tune" - that is, the main force point is close to the tip of the rod, "the tune" - that is, the main force point in the rod body, "carcass tune" - that is, the main hand force point near the handle. Handle. The key to the tuning is the taper of the rod, which is the difference in angle between the rod's first diameter (the diameter of the tip) and the first diameter (the diameter of the last section of the rod). The larger the taper, the more forward the force will be after the fish is caught, and the smaller the taper, the more backward the force will be after the fish is caught. You will have a deep understanding of taper after referring to both traditional and platform fishing rods. Then we choose the fishing rod is a clear picture, small fish with the first tune, medium-sized fish with the tune, a little bit of a large carcass with the tune, and then a little bit of a large car rod will depend on the rod.

2: strength: whether the rod is strong, will not often break, directly determines the life of the rod. The strength of the rod and the hardness of the rod is not necessarily related to this point is often confused, it is with the rod wall thickness, fishing, material has a necessary relationship, the main impact is the thickness of the rod wall. Taiwan fishing, especially in Taiwan fishing in the competition rod why the section are very long? The storage of long rods is never as convenient as that of short rods, which is obvious, so why do manufacturers want to maximize the long and avoid the short? One of the fundamental reasons is to reduce the number of connections with too many sections and strengthen the wall thickness of the existing sections to avoid rod breakage. The impact of tonality on the strength is also very important, take the first tune and carcass tuning comparison is obvious, the first tune in the fish, the force point leaning forward, rely on the rod tip or the rod of the first three sections and the fish against the carcass tuning is the whole rod in the effort and the power of the fish. The first tune is partially involved, while the carcass tune is all involved in the fight, the result is self-evident.

3: hardness: a few years ago with an old fishing friend in the conversation, the old friend gave a very graphic example: the same weight and length of a steel pipe and a steel bar compared to the result is not easy to bend the steel pipe is easy to break, easy to bend the steel bar is not easy to break. Let's ignore the effect of material on hardness, can be interpreted as, a fishing rod diameter thickness determines its hardness.

4: Material: There are three easily confused things in a fishing rod, namely: strength - hardness - waist strength. Do not be waist power in the waist of the word misleading, fishing rod in the waist of the force does not mean that the rod in the middle of the power of the sections, but refers to: rod bending force to restore the original state of the rebound force issued. The main factor that determines the waist force is the material. Nowadays, there are four types of rods on the market: carbon, resin, fiberglass and hybrid materials. Carbon rods are the most popular, and Wobbler once visited the former Golden Boy rod factory (which has now collapsed). Simply put, carbon rods are carbon cloth rolled out, carbon cloth to the tonnage of good and bad, the higher the tonnage of carbon cloth the more expensive, on the contrary, the cheaper. To say the least, our country now can not produce high tonnage of carbon cloth, now in a state of dependence on imports, so Japan, South Korea, the rod is expensive. The country's technological underdevelopment also affects us anglers. I'm sorry for digressing, but let's get back to the topic. The material itself, the greater the elasticity of the waist will be more prominent, many anglers are not satisfied with their own rods, the waist is not enough, there is no sense of touch, the root cause is poor in the material. For carbon this chemical things, anglers do not need to study it, we can not study it. The most fundamental source of protection for the material is your relationship with the owner of the fishing tackle store? For a favorite rod, you should check on the Internet or chat with your fishing buddies beforehand. When you seem to be an expert with the owner of the fishing gear to deal with the time, he will not black you, also dare not black you.

The strength, hardness, taper, material and waist strength of a fishing rod is not a single existence, they are mutually among them. For example: the waist force and the hardness of the rod itself has a certain relationship, after all, the harder the rod bending after the force issued by the force is greater; but on the other hand, the role of hardness on the waist force is not a straight line, the harder the rod the waist force is greater. Another example of particularly hard rods, hard to not bend at all, then its waist force is equal to zero, that is, what people say, "no bending is no waist force. Another example: the taper on the rod's various properties and so on, these issues can not be too rigid. A lot of factors are **** with the decision of a rod's strengths and weaknesses.

1. Fiberglass fishing rod

Also known as fiberglass rod, fiberglass resin rod. It is the use of fiberglass satin cloth, bath dipped in epoxy resin, aldehyde resin, high temperature curing molding (hollow tube or solid body), with good toughness and elasticity, is the production of fishing rods to modern synthetic materials, factory production of the first generation of products. Fiberglass fishing rods have good insulation. Fishing rods are not coated after shaping before the cavity, the rod body color yellow, brown. At present, the domestic and some countries and regions in the production of fishing rods, some in the bath dip resin liquid carbon black powder, on the one hand, with the carbon fiber cloth (black) mixing and shaping, to get the color and luster consistent; on the other hand, some producers to dye black fiberglass cloth pretending to be carbon fiber or carbon fishing rods.

2. Plug-in rod

Also known as parallel fishing rod. It is made up of several sections of the rod body and each other inserted to form a whole fishing rod. Divided into solid plug rod and hollow plug rod two kinds. Hollow plug rod body can be loaded into the bottom section and the bottom two sections of the rod body. In Europe and the United States popular use of plug type fishing rod. Advanced carp rods are also mostly combined with the plug and splice method. It is characterized by a tight interface and good overall performance after the rod is stressed

3. Pull-out rods

These rods are also known as "Tianyao" rods and vibration-type rods. Pulling rod is a hollow rod, can be several sections of the rod shrinkage hidden in the bottom handle of the rod tube. Characterized by easy to carry, but the solidity is often not as good as the plug-in rod.

4. Sea rod

In our country, the fishing rod on the pretense of a winding wheel, over the line guide eye, can be put line, reel rod collectively referred to as the sea rod. Some areas also known as casting rod, casting rod. Sea rods have the function of extending the fishing point by casting the line far away and releasing and retrieving the line freely according to the amount of winding. According to this function, sea rods are divided into boat fishing rods, rocky rods, beach fishing rods, snapper rods, trout rods and other categories. Its length is generally 1.6 meters, 1.8 meters, 2.1 meters, 2.4 meters, 2.7 meters, 3.0 meters, 3.3 meters, 3.6 meters, 3.9 meters, 4.2 meters, 4.5 meters, 4.8 meters, 5.4 meters, 6.3 meters, 7.2 meters

5. Rods for fishing

Changing the rod is also known as the bottom of the handle can be changed fishing rod. This kind of fishing rod with more than two can be socketed bottom handle, mainly used in river fishing, pond fishing, reservoir fishing rods, such as a 5.4-meter full-length rod for six sections, when fishing to choose a 4.5-meter full-length rod, you can vibrate out (plug type) 5.4-meter rod to remove the bottom section of the rod tube, become 4.5-meter full-length rod, and then from the front end of the rod into the coat into the bottom of the handle of the other spare, that is, into a 4.5-meter full-length hand rod, the rod, the bottom handle of the bottom of the bottom of the bottom of the bottom of the bottom of the bottom of the bottom of the bottom of the bottom of the bottom of the bottom, that is, into a 4.5-meter full-length hand rod, the rod, the bottom handle of the bottom of the bottom of the bottom of the bottom of the bottom of the bottom. From the front end of the rod into another spare bottom handle, it becomes a 4.5-meter rod, from which a 7.2-meter rod becomes a 6.3-meter rod, a 6.3-meter rod becomes a 5.4-meter rod, a 5.4-meter rod becomes a 4.5-meter rod, a 4.5-meter rod becomes a 3.6-meter rod, and a 3.6-meter rod becomes a 2.7-meter rod. In this way, the change of fishing rod can play a role of two rods.

6. Carp rod

The fishing rod is specialized in fishing for crucian carp (family crucian carp, wild crucian carp, white crucian carp). Characterized by the rod diameter is thin, most of the rod handle wrapped with silk or acrylic thread, was spun outside the hammer type, holding the rod handle has a good feel; the whole rod contraction after the length of about 1 meter, in order to reduce the number of sections of the rod section, so that the overall rod to maintain a very good tough curvature; the front section of the tip of the rod for the solid body, fine and has a good toughness. Carp rod length is generally 2.1 meters, 2.4 meters, 2.7 meters, 3.0 meters, 3.3 meters, 3.6 meters, 3.9 meters, 4.2 meters, 4.5 meters, 5.4 meters, 6.3 meters. Commonly used rod length is 3.6~5.4 meters

7. Dual-purpose rods

Called dual-purpose rods in our country refer to rods that have the functions of both hand rods and sea rods. The rod is equipped with a reel and a line guide. When used as a hand rod, can be released through the reel with the rod length or longer than 30 to 50 centimeters of fishing line, or less than the rod length of 30 to 50 centimeters of line, according to the operation of the hand rod to use. The difference is that when the angler catches a big fish, the dual-purpose rod can let go of the line and reel in the line, so it is not easy to break the rod and line due to the strong force of the fish's struggle. If it is used as a sea rod, it can be used to cast far away from the fishing spot. The length of the rod is 4.5 meters, 4.8 meters, 5.4 meters, 6.3 meters, 7.2 meters. The name of dual-purpose rod is the customary name of fishing enthusiasts in China, but in Japan, it is called "Isogee rod". It is different from other rods in that it has a small guide to prevent the line from hanging up when it is used as a hand rod, and a thin rod body, especially the tip section in front of the rod is thin.

8. Carbon fiber rods

Also known as carbon rods, is the use of high-tech carbon dimensional material manufactured. With conductivity (Ωcm - 1.5 × 10-3) and very good tensile strength (such as 12,000 filaments number of units, its tensile strength of kg/mm2 - 400). At present, the vast majority of carbon fiber fishing rods are used in the longitudinal spinning of carbon fiber longitudinal cloth Zheng tube, cured by the resin impregnation and manufacturing. Used in the production of fishing rods, carbon fiber content, how much, directly determines the value and grade of the rod. General carbon content of 30%, 90% or so. Fishing rods made of carbon fiber has a light, solid, high tensile strength, but should pay special attention to the use of anti-electricity.

9. Stream rods

These rods are specially designed for use in mountain streams and shallow waters with fast currents, and are mainly used for catching small and medium-sized fish such as horse mouthed fish, longnose fish, short-bearded jaw fish, and oil fish. Stream rods are characterized by a contracted length of 58 cm or 37 cm, which is easy to carry; the tip of the front section of the rod is solid, thin and with good toughness. The length of the rod is generally 2.7 meters, 3.6 meters, 4.5 meters, 5.4 meters.

China's fishing enthusiasts very much like to use the stream rod, and extend it to the pond fishing use. In order to adapt to the far fishing spots, there are also 6.3 meters, 7.2 meters stream rod supply.

10.Center Pass Rod

The center pass rod is a rod in which the line passes inside the rod body, so it is also called a center pass rod. The rod is equipped with a winding wheel, the line out of the body through the hole in front of the wheel seat into the hollow body, from the tip of the rod out of the line. The advantages of the rod are:

(1) not installed over the line guide, the use of the rod will not produce the line from the entire rod through the rod body, when it is under pressure to maintain the overall stress of the rod.

This kind of rod is divided into two kinds of combinations:

One is the vibration out of the type of pulling rod;

The other one is the parallel relay type of insertion rod.

At present, this kind of fishing rod is very popular in foreign fishing enthusiasts, mainly used for boat fishing rod and iso fishing iso rod (our country is called dual-purpose rod).