What is the correct installation method of security doors and windows? What are the precautions?

In the process of home decoration, anti-theft doors and windows are essential. Installing anti-theft doors and windows can protect their assets and lives, because the public's concept of anti-theft system will still be strong. But in fact, most people invite professional installers to install them, so few people know the installation methods and precautions of anti-theft doors and windows. Let's take a look with us.

What is the installation method of anti-theft doors and windows?

1, indicate the construction guide line on the wall surface, and build the room with large boards of 3mm, 5mm, 12mm, 15mm and 18mm respectively (this should be selected according to the thickness of the wall), so as to simulate the combination of various parts of the indoor wooden door frame and adjust them to be completely consistent. Then put the edge of the door cover into the wall hole, and the edge of the door frame and the top of the door frame form an angle of more than 45 degrees. Make sure that both sides of the door frame are parallel and perpendicular to the top of the door frame.

2. After the indoor wooden door frames are installed, the concave and convex parts between the indoor wooden door frames will be polished and polished to fill the gaps, and the wall mortar will be leveled and tiled.

3. Determine the hinge installation position of the door frame, mark the corresponding parts on the door leaf, and then embed the appropriate gaps. Make a 2-3mm slot on the door leaf, and tighten the hinge with the equipped screws. Temporarily fix the door leaf at the corresponding installation position and adjust it to the accurate position, then mark the fixed position of the hinge on the door frame, process the hinge groove on the door frame, connect the door leaf with screws and fix the hinge, and install the lock cylinder plate box and its lock cylinder plate of the door frame, so that even if the door leaf is installed.

What are the precautions for installing anti-theft doors and windows?

1. The most important factor in choosing raw materials and purchasing security window is the material of stainless steel pipe fittings. Stainless steel pipe fittings national industry standard requires that stainless steel pipe fittings must contain a certain amount of nickel and chromium (SUS304) to ensure that stainless steel plates are not easy to rust. In addition, the thicker the pipe fittings are, the stronger they will be. The compressive strength of pipe fittings with a thickness of 0. 1mm differs by several hundred kilograms. Generally speaking, the national standard security window strength of 0.6mm to 0.8mm is enough. If it is on the first floor, add a line to prevent it from unfolding.

2. In the process of master's accurate measurement, it should be clear that there is a side door in the area where air conditioning must be installed, which is convenient for installation and maintenance. Generally, one is enough, not too much, otherwise it will be very unstable. At the same time, security window should not use too much force, which will make it unstable. If you don't like fixed windows, you can also push and pull the security window in your room, which will broaden your vision, but you must remember to close it at any time and place.

3. It is also best to install security window before the last paint in your house is finished, so that security window doesn't need to be cleaned after installation, and it will be good to repair the damaged paint during installation. After completion, it is necessary to check whether all screws have been installed to prevent workers from cutting corners.

4. Those who have children at home can also consider using security window for semi-theme activities at home. This installation method, the level of its anti-theft system is often slightly lower, mainly to protect children and prevent them from falling from the bottom of the building.