A video tutorial on tying a fishhook.

Click on the fishhook video tutorial to view: fishhook tutorial.

The first method is to circle first and then knot.

This method is the first hook tying method that many anglers learn. The operation is very simple, and it takes three steps to tie it.

1, along the hook handle, wind the fishing line around the hook handle, with the small hook winding 4 times and the big hook winding 6 times, leaving a thread end of about 4 cm at the bottom of the hook.

2. Close to the fishing line at the handle of the hook, make an opposite coil and insert it from the hook tip. In this way, when passing through the two coils, be sure to press the thread end on the bottom of the hook.

3. Pull the line at the bottom of the hook with pliers, pull the fishing line at the handle of the hook by hand, and tighten it hard to cut off the redundant line at the bottom of the hook. The other hook does the same, and the two hooks are tied together.

The second method, double finger winding.

This method is called the fastest knotting method. There is a merchant in Tianjin fishing gear exhibition. In this way, 1 min has tied 36 toll lines, which is amazing and its operation steps are not complicated.

1. Make a coil, press two fishing lines parallel to the hook handle, leave 3~4 cm of fishing line facing the hook bottom, and hold the two fishing lines and the hook handle by hand.

2. Extend the index finger and middle finger with the other hand, unfold the coil, and bypass the hook tip from the hook bottom and hook handle. Press two fingers down around the handle of the hook and continue winding. After winding for 4~6 times, continue to hold the fishing line and hook handle with your fingers.

3. Pull the thread end at the bottom of the hook with pliers, pull it down hard, then pull the fishing line at the handle of the hook, and pull it up gently to ensure that the fishing lines are tightly tied together, cut off the excess thread end at the bottom of the hook, and tie another hook according to the above method, and the double hook binding is completed.