How to DIY handmade paper wind chime method illustration

How happy will it be to make a wind chime by hand and hang it in your room? Here is a very very super super easy way to make a paper wind chime!

Prepare two colors of cardboard colored paper for making the sphere, fishing line (to connect the sphere), twigs, scissors, pencils, and a compass.

1. Draw circles with a diameter of 6cm on top of the cardboard paper and cut them out. It is enough to make about 40 balls, or more if you wish to make more sumptuous wind chimes.

2, cut to the center of the circle position, you need to set another ball, so leave a gap in the thickness of the paper.?

To cut as shown in the picture (see the paper thickness of the confetti, right?). .

3. Nest two balls of different colors together.

Finished cross spheres. Here's how to connect these spheres. To be able to make the wind chime more sensitive to the wind, I used a thread thinner than fishing line.?

4. In the same order as in the picture above, thread the needle and thread through the edge of the red piece of paper on the cross wire, tie a knot, and then pull it down along the cross wire and through the edge of the gold piece of paper. Repeat the same operation.

This will make a strip, the number of balls is about 5-6. "

1, prepare two branches, of course, do not have to be a branch, if the conditions allow you can also use a special shelf.

2, cross and then fixed with steel wire.

Just made the paper wind chimes hanging on the shelf to complete the beautiful country style wind chimes ~ in order to make it fluffy, so that the number of balls in each wind chime is different.

Steps: Draw a 6cm diameter circle on top of cardboard and cut it out. It's enough to make about 40 balls, or more if you want to make more sumptuous wind chimes.

Cut to the center of the circle, you need to set another ball, so leave a gap in the thickness of the paper. To cut as shown in the picture (see the paper thickness of the confetti it)

Colorful paper wind chimes DIY

The two balls of different colors are nested together to complete the cross sphere. Now it's time to connect the spheres

To make the wind chimes more sensitive to the wind, I used a thread thinner than fishing line. In the order shown in the picture below, first pin the thread through the red paper edge of the cross wire a little, then tie a knot, then pull it down along the cross wire a little through the edge of the gold paper. Repeat the same process.

This makes one strip, with about 56 balls.

Cross and secure with wire.

The paper wind chime you just made is hung on a shelf to complete the beautiful rustic wind chime ~ to make it fluffy, make a different number of balls in each wind chime