How much is a computer wood carving machine?

Generally, it is about 8000-24000 yuan, so you should pay attention to maintenance after buying it.

This is the maintenance method:

First, the continuous running time is less than 10 hour every day to ensure the cleanliness of cooling water and the normal operation of the pump. Do not let the water spindle motor be short of water, and change the cooling water regularly to prevent the water temperature from being too high. In winter, if the working environment temperature is too low, you can replace the water in the water tank with antifreeze.

Second, every time the machine is used up, pay attention to cleaning, be sure to clean up the dust on the platform and transmission system, and lubricate and refuel the transmission system (X, Y and Z axes) regularly (weekly). (Note: X, Y and Z three-axis polished rods are maintained with engine oil; Add high-speed butter to the screw; In winter, if the working environment temperature is too low, the lead screw and polished rod (square guide rail or circular guide rail) should be cleaned with gasoline first, and then engine oil should be added, otherwise the resistance of the transmission part of the machine will be too large, resulting in dislocation of the machine. )

Three, electrical maintenance inspection is, be sure to cut off the power supply, after waiting for the monitor without display and the main loop power indicator light goes out, can be carried out.

Thank you for your adoption!