How to Adjust the Bleaching of Corn Fishing

How to adjust the drift of corn fishing is introduced as follows:

1. Prepare tools: prepare tools such as hooks, corn, fishing lines and floats. In addition, lead skin is needed, and heavy lead is generally used for bleaching.

2. Bottom-finding: Step 1: Bottom-finding, temporarily empty the hook, and the subsidiary does not need to hang up first. After the installation is completed, the fishing team enters the water, so that the float moves up and comes out, and the water depth is roughly observed and measured.

3. Leveling water: Then the float moves down about 25 cm. Trim the lead gradually, so that the weight of the lead will be reduced and the float will rise. As long as it is basically consistent with the water surface, the process of leveling the water surface is completed.

4. Fishing: Finally, fishing. Hang the corn on the hook first, and then hang the secondary line. Finally, adjust the fishing order, generally speaking, 3 to 4 orders are more appropriate. But the adjustment is different under different fishing conditions, not only the fish species, but also the weather and water conditions.

How long does it take to hang corn rows with double hooks?

As mentioned above, when using double hooks to hang corn, you must adjust the drift in the right way, so that the fishing effect will be better. In addition, the collocation of other fishing gear also needs attention, such as line separation. In addition to the material of the parting line, there is another important aspect: length.

Generally speaking, when fishing most species, you can use a slightly shorter parting line, that is, the length of the parting line is concentrated between 50 cm and 60 cm, not too long.

However, if you are fishing for very large species, a sideline between 60 cm and 100 cm is possible. Because the auxiliary line needs to be folded in half when it is used, it cannot be prepared too short, which will affect the use.