Traditional Culture Encyclopedia - Traditional culture - Woodworking technology and construction technology
Woodworking technology and construction technology
Woodworking and building technology
Woodworking and building technology
I. Construction Contents
Wooden doors (doors and sliding doors)
Second, the construction technology
1, installation procedure of horizontal door: determine the installation position-pop up the installation position line-put the door window frame in place-temporarily-temporarily fix it-fix the door frame with a wire pendant-fix the doors and windows-embed the wall-hang the sash on the door frame-dig out the matching page slot according to the size of the door-accurately position-install and accessories.
2. Installation procedure of hanging sliding wooden door: determine the installation position → fix the door top → fix the side frame steel plate → fix the pendant on the I-beam slider → fix the working rail → fix the lower guide rail → enter the special hole at the top of the door leaf → level the door guide rail along the lower part → fix the hanging bolt and pendant → accept the door edge and side frame plate → fix the door → install the decorative panel.
3. Installation procedure of sliding window: determine the installation position → fix the lower frame plate → fix the side frame plate → fix the upper frame plate → pick out the wooden groove with the same thickness as the steel plate → stick the special wheel box in the reserved hole at the lower end of the sash → install the sash on the window rail → check the gap between the window side and the side frame plate → adjust → stick the face.
III. Progress of work
1。 In the construction of wooden door window cover, first of all, holes should be punched in the bottom wall and the lower wooden mold. The spacing between wooden patterns is less than 300mm, and the spacing between rows is less than 150mm.
2. Then cut the large core board according to the designed width of doors and windows and doorways, and fix it on the wall and doorways with round nails. The round nail should be nailed to the wooden mold. After the bottom plate is firm and safe, it can be painted with fireproof paint.
3。 Doors and windows should be covered with plywood with beautiful patterns and smooth surfaces. Plywood tree species should meet the design requirements.
4。 When cutting veneer, first pop up the cutting line according to the width of the door opening and the surface, cut with a sharp knife at an angle of 45 with the seam, and then stick latex on the back and bottom plate. Nail-free reinforcement nails with a nail gun.
5. The joint between the door opening and the wall should be straight, at an angle of 45 with the joint. After the plywood is pasted and installed, it is closed with wood corner lines, and the horizontal and vertical joints of corner lines are treated with 45 corner joints.
Woodworking technology and construction technology
Four, wooden curtain box construction technology
1, construction content
Curtain boxes come in two forms:
One is a room with a ceiling, and the curtain box should be hidden in the ceiling and completed together on the top ceiling.
The other is that the room is not hung, the curtain box is fixed on the wall, and the window frame is integrated.
2, the construction site
1) The specifications of the curtain box are about 100 mm high, unipolar width 120 mm, bipolar width 150 mm or more, and the shortest length of the window width should exceed 300 mm .. exceeding 150 mm, which can be as long as a wall.
2) Make curtain box with large core board. If the surface is coated with transparent oil, a decorative plate with the same material as the window frame should be pasted. The bonding surfaces are the outer surface and the bottom surface of the curtain box.
3) The straight-through curtain box can be directly fixed on both sides and the top surface of the wall. Non-penetrating curtains should be made of metal brackets. In order to ensure the smooth installation of curtain box, the length of windows on both sides is equal. Bomb line.
In the field of architecture, carpentry is the most widely used, and the decoration industry is also the most common. The above is about carpentry and construction technology. If you want to know more about woodworking technology and construction technology. Please pay more attention to Tuba Rabbit, which will provide you with more complete, detailed and updated information.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp; Wb, you can get it for free ~
- Related articles
- Sugar-coated haws are a specialty of that place. Is candied haws a specialty?
- What activities should hot pot restaurants hold to attract people?
- Access channels for automobile sales customers
- Investigation report on tourism resources of Zhongxiang Ming Tombs
- The Historical Evolution of Tea-picking Opera in Northern Guangdong
- What material is the glass door of the wardrobe and how is it made?
- Advantages and disadvantages of conference materials
- Who is the founder of Shi Touqin? Where do you live today?
- What are the types of traditional life insurance?
- Why is it that in some places women don't eat at the table?