Sponge wall printing tools are to be how to use the

Sponge wall printing tools are to be used how? The wall printing tool includes the construction method of applying the plasticized substance on the wall, as well as the lampshade, the pattern is exquisite, so the wall is polished, the color is beautiful, the construction cost is low, the washing is easy, brushing, printing, and then, through the template of the hollow pattern, the aggregate is scraped on the wall for decorating or decorating. However, it is constructed in a simple way and has six double-coating steps. Sponge Wall Printing Tool When printing, the hollow stencil with decorative patterns is pressed into the wall behind a cover and the surface of the wall is decorated in this way. Three dimensional, the printing process includes many tools for printing walls. Sponge wall printing tools, the most common are screen printing, sponge printing, engraving and the first two relatively simple colors, the latter can be done. Texture, acrylic gradient, covering is a transparent surface. The last thing is to lay the foundation. Otherwise, the wall will begin to grow. Brush a layer of force will stop it. There are three common brushing tools: brushes, rollers and sprayers. Therefore, there are three common methods: brushing, rolling and spraying. The painting sequence starts with the ceiling, then the walls, doors and windows, and finally skirting boards, window frames, etc. First, the brush method: the most primitive, the simplest and common. The advantage of sponge wall printing tool is low fuel consumption, suitable for all shapes and varieties of paint. The disadvantage is that it is inefficient and not suitable for fast-drying paint. If you are inexperienced, the paint film will produce brush marks, sagging, uneven brushing and so on. Second, roller coating method: suitable for large building area, high efficiency, but slightly poorer decorative performance. Choose a roller with appropriate length of bristles so that the paint will not accumulate at the end of the roller. Start from the edge of the roof and turn upwards in an "M" or "W" pattern to minimize splashing. Do not leave the wall after each application to obtain an even film. Third, the spraying method: It is suitable for applying high-density paint, because if the previous two methods are used, it is easy to leave marks and produce irregular colors. Regardless of the brushing method, be sure to use a primer to protect your walls and save money.

The above is the description of the problem of sponge wall print tool, hope it can help you!