How to change the hard disk mode when ASUS motherboard enters bios

The method to modify the hard disk mode is as follows: Press the DEL key immediately after pressing the power button of the host to enter the CMOS setting (different motherboards have different access modes, and you can operate buttons such as FESC according to the page prompts). When you see the BIOS main interface, if English is currently displayed, you can set it through the language bar in the upper right corner.

After the ASUS notebook is turned on, click F2 to enter the BIOS interface, as shown below: enter the startup menu, enter the setting value of BootOption# 1, and set the first priority startup device as needed. Take the following figure as an example. The first priority boot device is the hard disk.

Asus motherboard can set the hard disk mode in BIOS through the following steps: after booting, click F2 key or DEL key to enter BIOS interface; Click F7 to enter the advanced mode interface; Select PCH storage settings under advanced projects; You can set the corresponding hard disk mode in SATAModeSelection.

Press f7 to enter the advanced mode after booting into the bios, and find SATAModeSelection in the advanced options to change the hard disk mode you need. Different models of motherboards may have different names, and the specific motherboard model is the main one.

After entering bios, press F7 to enter advanced mode, and then find SATAConfiguration adjustment in advanced. AHCI and RAID need to install corresponding drivers.