Eagle kite how to tie line video

How to tie up an eagle kite video is as follows:

1. The first step is to first rip the line hook out of the spool, as shown in the picture below.

2, the second step, open the line hook, as shown below.

3. In the third step, hang the thread hook on the spreader bar as shown below.

4. Step 4, fasten the wire hook as shown in the picture below.

5.Finally, as shown in the picture below, the line of the eagle kite is tied.

There are many ways to tie the kite line, if it is lifting the line, the most simple, the best way is to tie a pig's foot buckle, good tie or unraveling the kite, pig's foot buckle, folded in half with a thread, the thread in the middle of the two loops and the line at the other end of the cross each other into a cross, and then knotted on the line with a common set of buttons that is made.

One end of the red line is tied to the kite, one end of the line as long as you tie a bigger knot on the line, this pig's foot buckle is the more you pull the tighter, the kite will also be good to loose line!

Generally, a line is tied to the bottom of the kite (one end is tied to the head of the kite about a finger's length backward, and the other end is tied to the tail about a finger's length backward,) and now the line is tied. There is only one main line left, and this line is the one that flies the kite, which is tied on top of the line you just tied, but in which section? You can roughly calculate that the line you just tied the kite with is divided into five parts, and the line that flies is tied in about three-fifths of the position!