How to install the light bulb of the Beastie Melt Wax Lamp

When using, screw the bulb into the lampshade to align the hole and screw it up clockwise, place the scented candle on the marble base, and then turn on the power. Each time the power is heated for 2-3 hours, 1-2 cm of the candle surface will slowly melt.

Note on the use of wax melting lamp

● You need to turn off the power before going to bed, to avoid the bulb working for a long time, the temperature is too high;

● The recommended working time in the highest gear is not more than 3 hours;

● Halogen bulbs have a large heat generation, do not touch the lampshade, the pole, and the light bulb when used for a long time, to avoid scalding;

● Various brands of All brands of candles are suitable, bare wax, paraffin wax is not recommended;

●Before powering on, make sure the bulb is completely screwed into the bulb base (until it does not move).

Please do not leave the lit candle unattended.

I hope my answer can help you.