Bathroom wall masonry practices

Directly chose to hit the keel, and then hang the cement board.

There are two main considerations for choosing light steel cement board to partition the wall, one is that this is faster to construct and the weight of the wall is very limited, unlike building with red bricks, which is not only troublesome to construct, but also the wall is very heavy. The other, is that this is more secure.

The reason is that the cement board is using the whole sheet splicing, so after a wall is done, there are only a few splicing joints, as long as in the later painting, these splicing joints to do a good job, then never have to worry about the later there will be seepage problems.

And with red bricks to build words, because the red brick and red brick between, there is a brick seam, so in the later use, water is very likely to seep out from the brick seam. So the bathroom partition wall, only this is the most reliable.

Expanded Information:

p>Precautions:

1, with cement board to do partition walls, although the solution to the problem of splicing joints, but the wall will have water seepage problems, mainly by waterproof coating. If the waterproofing is not done properly, then the water will still seep through the cement board.

2, with cement board partition wall, stability is certainly not as good as red brick. There is also the construction cost, which is much higher than red brick.