Panel furniture production line mainly includes what equipment

A, panel furniture cabinet production line equipment

1, double process plus row drilling package openers

This equipment is specifically designed for the cabinet production and research and development, double machine head an opening a slot, plus a row of drilling package is specifically used to play the level of holes, the row of drilling packages can be loaded with 9 drills, the cabinet production of several diameters of holes can be directly hit out without reaming! Avoid the situation that the holes are not round.

Platoon drill open nine drill bits rotating at the same time, so in the playing does not pass the aperture of the hole when the drill switching can be switched directly without the need to wait for the spindle speed to reach the specified speed like four processes to switch, which greatly improves the speed of the holes in the production of cabinets in the same configuration of the dual-process plus platoon drilling machine than the four-process efficiency is 30% higher. Only the production of cabinet friends can choose double process with row drilling machine.

2, sealing machine

Sealing machine has manual, semi-automatic, automatic. Full-automatic whether it is the efficiency or the effect of full-automatic is complete manual and semi-automatic, but manual sealing machine also need to have, because the automatic sealing machine can not seal the shaped boards.

3, laser infrared side hole machine

Sealing edge can be played on the side of the hole, laser scanning side hole machine infrared automatic scanning holes, punching accurate and fast, and at the same time can be processed for four pieces of plate.

Two, panel furniture cabinet door production line equipment

1, automatic knife opener

This opener is specially designed for the production of blister door panels and research and development, automatic knife opener equipped with a knife magazine, knife magazine is generally 12 knives can be loaded with 12 different knives, any complex pattern can be accomplished without the need to stop and manually change the knife. However, the automatic knife cutting machine knife speed compared to the four process head switching speed to be a little slower. Mainly do door friends can choose the automatic tool changer.

2, vacuum laminating machine

Vacuum laminating machine is relatively strong in the use of flexibility it is divided into two types, one is a cold glue vacuum laminating machine, the other is a hot glue vacuum laminating machine. The application of cold glue vacuum laminator is mainly reflected in the volatility and small water glue sol. Of course, it tends to be the popular vacuum laminator because of its available options. Then there is a combination of vacuum laminating machine, its application is mainly reflected in the combination of cold glue and hot glue on the function, matching to a certain extent called valuable vacuum laminating machine.

Expanded Information:

Paneled furniture production line maintenance maintenance involved in specific aspects. To the specific aspects of the main points are as follows:

1, after processing, we must promptly clean up the countertop and exposed electrical fittings on the dust, wood shavings, etc., to keep the countertop and machine clean and sanitary.

2, regularly clean up the rails, racks, sliders on the stained debris, in order to prevent debris interference leads to problems with the machine in the working process.

3, screw in the equipment determines the accuracy of the machine, and screw in the transmission process is indispensable. So we should pay special attention to regularly clean up the feeder screw, to prevent the screw on the sticky oil dust and other foreign objects.

4, regularly clean up the electrical distribution box, dust dust is the biggest killer of circuit board failures, a little more dust will lead to circuit board problems, it is easy to run breakpoints, machine operation disorders and so on.

Baidu Encyclopedia - Panel Furniture