What if the arrow feather is broken?

If it is an old and reliable spinning feather, look at the picture on the wrapping paper and aim at the position of the main feather. It is somewhat different from the traditional straight feather, and it is not completely aligned from the "root". Including the fitting angle and position (distance from the arrow tail), just refer to this specification. Listen to your description, the feather seems to fall to the left, I am very confused. I have feathers on my right. It's too elementary. I shouldn't have gone If I go to the left, I can only hit the left edge of the arrow platform, aim at the arrow feather as far as possible, and adjust the steel needle of the arrow platform to be flush with the side of the arrow shaft from bottom to top (just exposed or not exposed). The first is the main factor, because the bow is not adjusted well, the steel needle usually hits the lower right feather. Extra: The metal soundboard is slightly inclined when installing the bow without artificial bending. If the movements are inconsistent, it is easy to rub the feathers facing to the right. In the past, Beit could be broken, but now Beit is too brittle like stainless steel. You need a pen or something to roll on something soft, preferably your thigh, to bend it. Win-win carbon label is not necessary, but it is flexible and not suitable for the time when the arrow is hard and soft. But you move very well, and you won't hit anything when you adjust your bow. In fact, Beit has a personal tool called Qiuhua, once s e x, which is mounted on an arrow. Whenever it meets, it will be a chrysanthemum bird. That's a good idea. It's too expensive. Nobody seems to use it in China.