Job responsibilities of punch press

Part I: Job responsibilities of punch operators: seriously study and abide by the company's rules and regulations, obey the leadership's work arrangements, unite employees, make active efforts, do their jobs well and make qualified products.

1, responsible for the daily maintenance, inspection, maintenance, adjustment and fastening of the punch, and make records.

2, familiar with this type of work safety technology operating rules, in strict accordance with the safety technology and operating rules. Master the normal operation method of punching machine, make accurate judgment when the machine is abnormal, and take emergency measures timely and correctly.

3, in strict accordance with the operating procedures, confirm the normal working environment before starting the equipment.

6, should be idle running for 2-3 minutes before work, confirmed normal rear can use, shall not be run in spite of illness.

7, pay attention to work, remove all floating items on the bed.

8, check whether the workpiece meets the production process requirements (specifications, models, positive and negative tolerances, etc. ) you need to look good and then do it.

9. In the production process, the principles of "three inspections and one control" and "self-inspection and self-separation" should be followed, and the site should be kept clean and smooth at any time. If abnormal problems are found, the power supply should be cut off immediately, and the production can continue only after the fault is eliminated by professional maintenance personnel.

10, jobs and machines should be kept clean and tidy at all times, so as to perform their duties and eliminate potential safety hazards.

1 1. Before coming off work, the finished products should be piled up, the site should be cleaned, the power supply should be cut off and the switch box should be locked.

Tianjin Jixian Tianchen metal surface treatment plant

Chapter II: Punch Worker 1 Job Responsibilities, responsible for punch operation.

2, timely report the abnormal situation in the production process.

3. Assist in technology, quality control or other related work.

4. Keep the area clean.

5, according to the requirements of process documents and equipment operation process, complete the product production of this process.

6, do a good job in this process product quality, and cooperate with the inspector for product inspection.

7. Make records according to the requirements of quality and process documents.

8, according to the production plan to complete the output.

9. Maintain the responsible equipment.

10, complete the temporary task arranged by the supervisor.

Part III: Duties of the Punching Supervisor

Under the leadership of the director of the sheet metal workshop, I will seriously study and abide by the company's rules and regulations, obey the leadership's work arrangements, unite employees, work hard, do my best to save, do my job well and produce qualified products.

1, responsible for the daily maintenance, inspection, maintenance, adjustment and fastening of the punch, and make records.

2, familiar with this type of work ` safety technical operation procedures, in strict accordance with the safety technical disclosure and operation procedures. Master the normal operation method of punching machine, make accurate judgment when the machine is abnormal, and take emergency measures timely and correctly.

3, in strict accordance with the operating procedures, confirm the normal working environment before starting the equipment.

4, the punching machine designated personnel operation, irrelevant personnel without permission is strictly prohibited on the punching machine.

5. Whether the transmission, connection, lubrication and protective safety devices of the machine tool are normal, and the mold screws must be firm and immovable.

6, should be idle running for 2-3 minutes before work, check the flexibility of the foot brake and other control devices, confirm the normal rear can use, shall not be sick.

7. Pay attention to lubrication and remove all floating objects on the bed surface.

8. When moving or running the punching machine, the operator should stand still, keep his hands and head at a certain distance from the punching machine, and pay attention to the action of the punching machine at any time. It is forbidden to chat with others.

9, small workpieces, application of special tools, shall not be directly feeding or picking up by hand. emphasize

10, hands and feet are not allowed to be placed on the handbrake, and they must be moved (stepped on) once to prevent accidents.

1 1 When operating with * * *, the person in charge of moving (stepping on) the brake must pay attention to the action of the feeder. It is forbidden to move (stepping on) the brake while picking up the parts.

12, finished products should be stacked before coming off work, clean up the site, cut off the power supply and lock the switch box.

Chapter 5: Stamper's Responsibilities 1. Work hours are subject to the work arrangement, and you are not allowed to leave your post without permission.

2, according to the requirements of the work instruction operation processing, and strive to improve work efficiency and technical skills.

3. It is strictly forbidden to start other machines other than operation or change jobs at will, otherwise it will cause quality problems or mold damage accidents, and shall be investigated for compensation.

4, found abnormal situation in the work, timely report to the management.

5. Before leaving the post, you must do the following three things:

(1), pack, bind and reinforce the washed waste (belt); ② Pick up the products that have fallen to the ground and put them in categories;

(3) Clean up the scrap iron and sundries scattered on the ground and put them into garbage bags.