The installation method of the car driving recorders

Car Car Recorder Installation

How to install a car recorder

1, insert the memory card into the card slot of the car recorder, pay attention to the front and back.

2, the glass bracket and the car recorder installed.

3, wipe the windshield clean with a car towel.

4, install the car recorder to a suitable location, pay attention to not affect the driver's line of sight.

5. Insert the power plug of the CarLog into the cigarette lighter of the car.

6. Open the CarLog display and adjust the angle.

7. Connect the power cable of the CarLogger.

8. After installation, check and test whether the function is normal.

Car Recorder Installation Methods

1, rearview mirror type: clamped or adsorbed on the original mirror, so it looks more hidden, but due to the different sizes and shapes of mirrors, clamping / adsorption of the stability of the degree of difference, are more likely to be loose. It doesn't match all models.

2, another, is to use the rearview mirror bracket, the machine is fixed in the car's rearview mirror position, can be rotated 360 degrees, which is also more space-saving. But the car itself has certain requirements of the rearview mirror, the bracket is through the use of snap, stuck to the top of the rearview mirror, the rearview mirror part if too thick, there is no way to install it.

3, suction cups: must be adsorbed on the smooth and airtight. The surface of the object, if the car is above the film, the surface is rough and uneven, there is no way to install. In addition, in winter and summer, the adsorption capacity of plastic products decline or easy to aging. Not much impact resistance, but can have a long time to have a larger force on it, and change the installation position is very easy. Encountered an accident, you can easily take out the car for evidence, this is his biggest advantage. It is important to note that the suction cup should be reliable, otherwise it is easy to break. This way, is currently the most important domestic installation.

4, glued: the requirements of the installation than the suction cup is low, more surfaces can be used to glue, impact resistance, but not suitable for a long time, there is a large force acting on it, but after the fixed basically no way to move, move often leave residual glue, affecting the aesthetics. This way is more common abroad, the domestic car belongs to the high-grade consumer goods, more cherish the neatness of the car, the use of people is also less.