How to set Acer notebook boot to hard disk boot?

1. Restart the computer with the fixed hard disk and press F2 on the keyboard at the same time.

2. Enter the bios interface and select the boot option in the title bar.

3. Enter the boot interface. You can see the startup sequence at the bottom of the interface and find your SSD wisdom.

4. Then press F5 or F6 to adjust the SSD option to dao first.

5. After setting, press the F 10 key of the keyboard to pop up a small window to exit and save. Click here is the option.

6. Finally, the computer will restart. If the fixed hard disk is equipped with a system, start with the solid-state hard disk.

Extended data:

There are generally three ways to start a computer: CD-ROM drive, hard disk drive and U disk drive. Boot from the hard disk by default.

If the computer can't boot from the hard disk, you can set it as follows:

(1) Start the computer and quickly press F2 to enter the BIOS setup window.

(2) Select and enter the second item, "Advanced Biometrics". Find BootDevlicepriorfty (boot device sequence) in it, and find dao "first", "second" and "third" in turn (some BIOS are 1 ST boot devices; 2ndBootDevice) stands for first boot, second boot and third boot respectively.