How to deal with the wall burst skin

1, first of all, the wall on the skin clean off. Then the location of the skinned shovel clean, and then use sandpaper for the location of the skin to do sanding. Wait until the sanding is completed, in the location of the skinning scraping putty, until the putty is completely dry, to brush the wall with latex paint. 2, the wall skinning area is particularly large, the wall should first be peeled off the area of the skinning of the wall to shovel clean, it is recommended that it is best to shovel to the grassroots level. Then wait for the dust on the wall as well as stains cleanup is completed, and then brush on the wall 2~3 times the isolator. But each time you brush between the paint must be three hours, so that you can avoid the subsequent peeling off of the situation. Related knowledge: 1, wait until the isolating agent is completely dry, use water-resistant putty on the wall to do repair treatment, so that you can avoid the unevenness of the wall. Wait 6 hours, the water-resistant putty on the wall will be completely dry, then use sandpaper to do sanding on the wall. When the wall is particularly flat, you also have to clean the dust on the surface of the putty. Wait until the cleanup is completed, to brush the wall with latex paint. 2, the wall peeling off, because the wall within the humid situation. The wall will be wet may be the humidity in the air is particularly large, so that the wall is particularly humid, which will also make the floor of the home as well as furniture will also be affected. Under normal circumstances, this phenomenon is more common in southern cities, and in the summer humidity will be greater, so this phenomenon is more common.