How should HP printers use printing?

Taking HP 3620 printer as an example, using HP printer is divided into the following steps:

1. First, connect the computer to the printer, install the driver, and ensure that the computer is connected to the printer.

2. Open the paper box, put A4 paper, click the button in the lower right corner of the printer to start, and make sure that the printer has paper and ink before printing.

3. Click Start at the bottom of the taskbar to enter the printer page and control the printer to print with the computer.

Please pay attention to the following points when using HP printers:

1. If the printer generates heat, smoke, peculiar smell, abnormal sound, etc. , you must immediately cut off the power supply and contact relevant professionals.

2. It is forbidden to place other items on the printer. When the printer is not used for a long time, it is necessary to pull the plug out of the power supply and put it away.

3. When there is a thunderstorm nearby, unplug the socket from the power supply, because the thunderstorm may damage the machine.

4. When the printer and ink cartridge are not set, printing is prohibited. The print head and print shaft will be damaged.

5. When the printer is working, it is forbidden to cut off the power supply.

The above answers apply to most HP printers. Step 1: put the photo paper where you put it.

1. Remove all plain paper from the main tray. Put the photo paper vertically into the paper box. If there is a perforated label on the paper, please put the label up or face you when loading the paper to prevent the paper from printing on the label. Inkjet printer with paper tray loaded on the back-glossy surface or print side up.

2. Ink-jet printer with front-loading paper box-glossy surface or print face down. Laser printer with front carton-glossy surface or print side up. Adjust the paper width guide so that it is close to the paper edge.

3. Press the power switch of the printer to turn on the printer.

Step 2: Print photos.

1. Enter the folder where the photos are located, find the photos to be printed, right-click the photos, and select Open Method-Photos from the properties menu.

2. In the Print Photos window of Windows Photo Viewer, click the option "..." More options, and select Print from the list.

3. Enter the print interface, click More Settings to open the printer document properties window and enter more print settings. Such as paper size, color, etc.

4. After all the settings are completed, click OK, and then click Print.

5. After printing, the photos will be printed according to your settings. Upon completion, all photo papers will be taken out of the paper box and stored in the attached packaging box or plastic bag. If the paper is left in the carton for a long time, it may curl.

Extended data:

Print settings include:

1, vertical or horizontal

Select portrait or landscape printing. Directions menu on the Layout, Finish, or Properties tab

2. Carton or source

If your printer has more than one paper tray, please select the paper tray for loading photo paper. Source or Paper Source menu on the Paper/Quality or Properties tab.

3. Photo paper type

Set the paper type being used, such as HP photo paper, glossy paper or cloth photo paper. Type, Paper Type or Media menu on the Paper/Quality or Properties tab.

4. Paper size

Select the paper size to load into the printer, such as 4x6, 5x7 or 8x 10 paper. Size or Paper Size menu on the Advanced Options or Properties tab. Some newer printers support more paper options. Go to Create Custom Paper Size _ Personal Page _

5. Add or delete borders

Add a white border around the photo or print it to the edge of the paper. Borderless printing or paper size menu in advanced options. The Print Shortcuts tab may include shortcuts to printing with or without borders.

6. Quality: The unit of measurement is dots per inch (DPI) of printing resolution. Higher DPI will produce better quality photos, but it will slow down the printing speed and use more ink. Refer to the printer specifications for the printing speed (in pages per minute).

Color and quality settings:

1, draft: When the ink volume of the ink cartridge is insufficient or high-quality printing is not needed, the lowest DPI is usually used.

2. Normal: The default quality setting is suitable for most print jobs.

3. Best: DPI is higher than normal.

4. Maximum DPI: The highest available DPI setting.

5. On the Paper/Quality tab, select the "Quality Settings" or "Media" menu. Depending on the printer, the menu "Print at Maximum DPI" or "Output Quality" can be obtained through "Advanced Options". Color printing or black and white printing: depending on the specific printer, the following settings can be used.

6. Color: Use all ink cartridges to print full-color photos. Black and white or "printing only in black ink" or "monochrome": a printer that only uses black ink cartridges; Suitable for printing ordinary or low quality black and white content. Gray scale: the printer uses the ink in all ink cartridges to produce a wider range of black and gray; Suitable for high quality black and white printing.

7. Choose color and black and white settings according to the printer. Select color or black and white on the Print/Quality tab. In the Color tab, Properties tab, or Advanced Options, click the menu next to Grayscale Printing, and then select Non-color Printing, High-quality Grayscale Printing, or Printing with Black Ink Only.

References:

HP Printer-How to Print Photos

How to use HP printer, detailed! thank you

How to use an HP printer:

1. Printers for daily office use are basically off-line. If it is a local area network, you can set up a printer directly on your computer.

2. Offline printing includes copying the documents to be printed to the USB flash drive, and then insert link them to the computer host of the printer.

3. Whether it is black-and-white printing or color printing, you need to put the printing paper on the printer first to complete all the printing preparations.

4. Next, start the operation of the software part. Take word document printing as an example. If you print in word, you will jump to the following interface. First, select the driver software corresponding to the printer.

5. After printing settings, you can click the "Print" option at the top to print the file. This is how to use the printer.

How to use HP printer

How to use an HP printer? Let's take a look at how to use the HP printer with me ~

Installation-First, install the printer and connect it to the computer. Insert the CD and install the HP printer.

Print-Select the file to print, and then click Print. Unlike a large printer, this printer is slow, so it takes a while to print.

Copy-put the printed document on the copy cover of the printer, and then change the cover. There are two copy buttons, the black button is black when copying and the color button is color when copying. Just press the copy button a few times when making several copies. When copying, the cover must be tightly covered, and light transmission will affect the copying effect.

Scan (1)- Put the document to be scanned on the cover and cover it. Click the HPScan icon to pop up a dialog box.

Scan (2)- Click the first item "Photos to File" and then click "Scan".

Scan (3)- After clicking Scan, the Prepare for Scan dialog box will pop up. At this time, the printer will buzz and scan. Then save the location after scanning.

How to print on an HP printer?

Take the model of HP printer m 125 as an example, you can open the cover of the printer, then put down the contents with words, and then cover it. Finally, find the copy button on the fuselage and press the button to complete the copy. The specific operation method is as follows:

1. Open the top cover of the printer.

2. Then put down the printed page of the paper to be copied and cover it.

3. At this time, find the corresponding button next to the machine and press it.

4. At this point, you can see that copying has been completed with this printer.

How to print on HP printer?

1. Enter the control panel and click to view devices and printers;

2. Check whether the printer is selected on the Device Printer page.

3. If it is not selected, right-click the device and select Set as default printer.

Other reasons why the printer cannot print.

1, check for paper.

Most of the reasons why the printer can't print are because there is no paper, so the first thing to check is whether there is paper, so you can print without loading paper.

2. Restart the printer

Printers belong to electronic products, and problems in the use of electronic products are inevitable. Try restarting it and see if it can solve the problem. Bian Xiao encountered many printer failures and restarted it to solve them.

3, printer paper jam

Printer paper jam is also a common phenomenon, especially when the paper loaded in the printer has been used. This situation is very easy to jam, you just need to open the side of the printer to see if there is any paper jam.