How to install the bicycle pedal?

Bicycle pedal installation preparation tools: Allen wrench or adjustable wrench, grease, plastic gloves.

Bicycle pedal installation steps:

1. Before installing the pedal, be sure to distinguish between the driving side and the non-driving side. "L" means the non-driving side (left side) and "R" means the driving side (right side). Carefully observe that the thread directions of "L" and "R" are different, and pay attention to distinguish the left and right pedals.

2. Before installing the pedal, apply a proper amount of grease on the thread of the pedal, which can effectively prevent the thread from making abnormal noise when engaging with the crank.

3. First, install the pedal on the drive side (right side). First, tighten the pedal clockwise by hand to ensure that the pedal thread and crank are properly engaged, and then screw it to the specified force with tools.

4. The steps of installing the non-drive side (left side) pedal are the same as those of installing the right side pedal. Tighten the pedal counterclockwise by hand first, and then tighten it with tools to ensure the tightening force and prevent the pedal from loosening and causing danger.