Fixed in the wall of the drying rack to be how to install

Telescopic drying rack fixed drying rack installation method, first of all, if there is nothing on both sides of the block, any length can be installed, the pole on both sides of each side of the 15cm can be left.

8 expansion screws, impact drilling holes and then knocked into the screws, expansion to grab the wall can be installed on both sides of the window: measure the width of the window, left and right to leave at least 15cm of the bracket installation distance.

If there is nothing in the way on both sides, any length can be installed, leaving at least 15cm on each side of the pole. Measure the distance between the side walls, the pole should be about 0.2cm shorter than the distance.

Need to provide their own angle, with a good screws, first install the angle in the side wall, and then use the expansion screws to install the bracket Measurement: Measure the span of the railing, if there is nothing in the way on both sides, any length can be installed, leaving 15cm on each side of the pole can be.

Installed with self-tapping screws + socket, the installation try to choose in the thick T position will be more solid. Can play more self-tapping screws in the middle position to reinforce, more than 3m is recommended to add an extra bracket.

Measure the width of the smaller position of the arc as the bracket installation distance. If there is nothing in the way on both sides, any length can be installed, leaving at least 15cm on both sides of the pole. If it is a wall railing, install it with expansion screws, if it is an iron railing, install it with self-tapping screws. Installed on both sides of the balcony wall: measure the span of both sides of the balcony wall (curved balcony wall span 2m, bracket installation position at least 2.1m, pole length at least 2.4m). This installation requires customers to provide their own protruding bracket, first fixed on the wall, and then install the push-pull bracket to play the role of extension.

This kind of balcony needs to be equipped with U-peg installation, the U-peg to hold the whole pole, and then screws can be fixed to the measurement method: the hand can not touch the range (such as red dotted line area) can not be counted as the scope of the installation. Measure the width of both sides of the window, if there is nothing on both sides of the block, any length can be installed, each side of the pole to leave at least 15cm

Installation method: 8 expansion screws, impact drilling holes and then knocked into the screws, the expansion of the wall can be fixed by grabbing the drying rack installation method to measure the position of the drying rod installation, and then marking the installation of the drying rack holes, drill holes in the holes, and hammered into the pre-buried plugs or expansion screws. or expansion screws. Then align the drying rack/bracket to the hole position, use screws to fix the drying rack/bracket to fix the decorative cover or install the drying rod, and finally fix the decorative cover to the wall with small screws.