How to connect the intelligent light controller

The specific operation steps are as follows:

1. Generally speaking, when wiring is installed in the bedroom, there are power sockets near the switch box. Put the remote control switch of the intelligent lighting lamp into the switch box, and lead out two power cables, live wire and zero wire, from the nearby power socket, and connect them to the L and N terminals respectively. Remove the three wires of the original switch and connect them with the remote control switch K 1/K/K2 of the intelligent lighting. Pay attention to the three terminals of the original switch; If the bedside switch box is not easy to connect to the power supply, but the bedroom door switch box is easy to connect to the power supply, you can put the remote control switch of the intelligent lighting in the door switch box, and the wiring cannot be changed; If there is no power supply nearby, you can consider from the lighting. Put a wire on the lamp along the original conduit to the switch box at the door of the bedroom, and then connect it with the zero line at the lamp, and you can install the above connection.

2. The remote control switch of single fire intelligent lighting lamp is easy to install. Standard 86 wall switch can directly replace the original wall switch without connecting the zero line and changing the lamp (suitable for connecting fluorescent lamps, energy-saving lamps, incandescent lamps, spotlights, halogen lamps and other ordinary lamps);

3. There is no need to rewire the remote control switch of fire-fighting zero-intelligent lighting, and there is no need to replace accessories for lamps; When in use, select the required lighting group, press the anti-theft key for 5 seconds, the selected lighting group will flash twice, and then go out after a delay of 60 seconds, at this time, the lamp has entered the anti-theft working state; Two-way control, no interference!