How to use the woodworking cutting machine?

1. The rotating direction of the saw blade should be consistent with the direction marked by the machine body. Seen from the front, the cutting blade rotates clockwise, and the rotating direction of the blade is consistent with the direction marked on the fuselage.

2. Holding the machine in your right hand, chopping wood should be pushed from near to far. Cutting wood larger than the radius of the saw blade can not be cut at one time, but it can be cut many times.

1, after the installation of the cutting machine, turn on the power supply and check whether all parts of the whole machine rotate flexibly and whether the fasteners are loose.

2. Turn on the power supply and press the host button to see if the blade rotates in the direction of the arrow. If it is reversed, adjust it immediately. Only after passing the inspection can cutting be carried out.

3. The cutter moves forward and backward automatically. When the tool moves to the end along the workbench, it can automatically retreat to the starting end and stop moving automatically. If you need to step back during work, just press the back button on the console. You need to advance in fast retreat, or you can press the work feed button to feed. Press the stop button to stop the movement of the tool, whether it is feeding or withdrawing.

References:

Baidu encyclopedia cutting machine