How to connect 7-hole AC charging pile to socket?

1. When inserting the bus bar, the live wire, ground wire and zero wire must be connected to the bus bar first, and the connection must be firm to prevent fire accidents caused by virtual connection;

2. The most important thing is to weld a1000Ω resistor between the CP line and the ground wire (the charging current should not exceed 8A, and a smaller resistor should be welded if it exceeds 8A, such as 680Ω, 220Ω,100Ω, and different types of cars need to be connected with different resistors), otherwise it will not show that the charging gun is connected and power cannot be taken;

3. Just short (directly connect) the CC line with the ground wire.

If you don't know the electrician, it is not recommended to answer it yourself. You can buy a converter for tens of dollars!

Even the picture, forget to pick!