How to make ancient handmade soap

1. Dissolve the caustic soda with water, put the water and caustic soda in a container and keep stirring until the water becomes transparent. It should be noted that there will be foam and fever during the stirring process.

2. Put in the oil while stirring, and after the caustic soda is completely dissolved, put in the oil gradually while stirring. Stir with a blender for about 10 minutes.

3. Pour in the red wine.

4. Continue to stir carefully and keep stirring carefully for about 10 minutes until the red wine is thoroughly and evenly distributed. At this point, the liquid begins to gradually thicken.

5. Inject it into the mold, stop stirring, and after two or three minutes, inject it into the mold.

6. Leave it as it is for 1~2 days in a warm place. At this time, the liquid creates a chemical reaction in the mold, so please do not touch it with your hands.

7, remove from the mold, remove the soap from the mold, you can insert a knife or scissors into the mold in order to facilitate smooth removal.

8, and finally cut into the appropriate size of the square, placed in a ventilated place, avoid direct sunlight, put more than a month later, the production is complete.