The network cable is too long to be laid on the ground. I want to fix the network cable along the corner, but I don't want to nail it to the wall. Is there any good way?

1. Install trunking on the wall, fix it with screws, and put the network cable into trunking.

2. Cable shall be laid along the baseboard. If it is a PVC skirting line, it can be removed and opened inside.

Trough is used to arrange and fix wires, such as power cables and data cables, on walls or ceilings.

Generally, there are two kinds of plastic materials and metal materials, which can play different roles.

According to different materials, trunking can be divided into many types, such as environmental protection PVC trunking, halogen-free PPO trunking, halogen-free PC/ABS trunking, steel-aluminum trunking and so on.

Commonly used metal trunking specifications are 50mm× 100mm, 100mm× 100mm, 100mm×200mm, 100mm×300mm, 200mm×400mm, etc. The reference standard is JB/T9660- 1999 "trunking".

Extended data

Precautions for installing trunking:

1. The trunking shall be smooth without distortion, with no burr on the inner wall, tight and straight joints and complete accessories.

2. Slot joints shall be smooth, joints shall be tight and straight, slot covers shall be smooth without warping, and outlet positions shall be correct.

3. When the trunking passes through the deformation joint, the trunking itself should be disconnected, and the trunking should be connected by a connecting plate and not fixed. The protective ground wire should have compensation margin. The trunking below CT300* 100 is fixed with 1 bolt, and the trunking above CT400* 100 is fixed with 2 bolts.

4. All non-conductive parts of non-metallic trunking shall be connected and bridged accordingly, so as to make it a whole, and shall be connected as a whole.